302 vr's 351

muddslide

New Member

Mar 10, 2003

505

0

0

DAYTONA BEACH

Mar 18, 2004

#1

• Mar 18, 2004

• #1

What are the major differences between the 302 and the 351. Can I use the same waterpump, timming chain, alt and other exterior bolt ons? Also are the tranny holes on the back the same, can I bolt the same tranny to the 351? thanks

 

85_SS_302_Coupe

it sucks (I know) to be on the receiving end

15 Year Member

Nov 11, 2003

6,945

1,598

223

Northern KY

Mar 18, 2004

#2

• Mar 18, 2004

• #2

This is some what a vast subject, i'd recommend a search. But on the specifics you asked about, that's a big old no on the waterpump and timing chain, but the accessories up front like the alternator/power steering can be used, but you'll need a different bracket for them that's specific to a 351W. The tranny will bolt right up also. You will however, need new headers, new intake (only the lower if you're EFI), you can use 302 heads but it would be a waste of time unless you've got some nice aluminum units. Also depending on whether or not you're EFI or not, you'll need a cowl hood because it's going to be too tall to fit under your hood without a lot of other things, like a lowered tubular K member, solid motor mounts, and the shortest height EFI intake you can find. If you're going carbed it's much easier, but if you plan to run a Victor or Victor Jr. intake with or without a carb spacer, and a taller style air filter, you'll need the cowl.


BTW i believe the bell housing is different for a 351W, but dont quote me on this one.

 

muddslide

New Member

Mar 10, 2003

505

0

0

DAYTONA BEACH

Mar 18, 2004

#3

• Mar 18, 2004

• #3

Thanks, I'm not worried anout hood clearence, I'm also bolting on a 671 blower and scoop so i will have to cut my hood. I have aluminum heads already on my 302 but i'm looking for around 600 rwhp. I know this is alot but with the r302/r351 blocks I know this can be happen. I'm just looking to build the best most cost effective sbf for my stang

 

TIMMY2734

Founding Member

May 17, 2002

1,330

1

36

Queens, NY

Mar 18, 2004

#4

• Mar 18, 2004

• #4

im pretty sure that the timing chain is the same for both blocks and that the water pumps vary by year.

 

85_SS_302_Coupe

it sucks (I know) to be on the receiving end

15 Year Member

Nov 11, 2003

6,945

1,598

223

Northern KY

Mar 18, 2004

#5

• Mar 18, 2004

• #5

As far as the aluminum heads go, you'll just have to drill out the bolt holes to i believe 1/2 inch so they fit on the 351W block.

 

5.0 HOtrain

Founding Member

May 20, 2001

2,247

0

47

New Hampshire

Mar 18, 2004

#6

• Mar 18, 2004

• #6

Bellhousing is the same, 600rwhp with a blower, christ I'm going to see 500+ n/a with box stock parts. 600 is doable n/a.

Dart block, 440cubic inch stroker, afr225,TEA TFS "R", victor's, or any head of high flow caliber, super victor intake, nasty solid roller (or hydro) just a quick off the top of the head list, but you could see 650-750fwhp out of such a combo

 

408stroker5.0

The world would be a better place if all males jus

Mar 10, 2004

639

0

16

Bonnyville, Alberta, CANADA

Mar 18, 2004

#7

• Mar 18, 2004

• #7

Remember that the balance of the 351 and 302 are different. Expect to use a different Flywheel/Ring gear, and balancer.

 

muddslide

New Member

Mar 10, 2003

505

0

0

DAYTONA BEACH

Mar 18, 2004

#8

• Mar 18, 2004

• #8

well i'm not rich so I will stay with a 302, now the question is should I go with the r block, dart block or a sportsman block? I quess the questions is how much do you want to spend on a motor. I'm looking for the best combo for my car

 

5.0 HOtrain

Founding Member

May 20, 2001

2,247

0

47

New Hampshire

Mar 18, 2004

#9

• Mar 18, 2004

• #9

muddslide said:

well i'm not rich so I will stay with a 302,

Click to expand...

I'm FAR from rich man I couldnt go with a Dart or "R" block. The parts are the same money wether for a 302 or 351 based stroker, crank,rods,pistons

 

muddslide

New Member

Mar 10, 2003

505

0

0

DAYTONA BEACH

Mar 19, 2004

#10

• Mar 19, 2004

• #10

Does anyone know how much machine work has to be done to a dart block before using it and what should I look to pay.

 

TIMMY2734

Founding Member

May 17, 2002

1,330

1

36

Queens, NY

Mar 19, 2004

#11

• Mar 19, 2004

• #11

expect to pay at least 4-5k in just the shortblock alone

 

muddslide

New Member

Mar 10, 2003

505

0

0

DAYTONA BEACH

Mar 19, 2004

#12

• Mar 19, 2004

• #12

HOW MUCH JUST FOR THE MACHINE WOK, I'M JUST TRYING TO EDUCATE MYSELF BEFORE I GO AND SPEAK WITH LOCAL MACHINE SHOPS

 

5.0 HOtrain

Founding Member

May 20, 2001

2,247

0

47

New Hampshire

Mar 19, 2004

#13

• Mar 19, 2004

• #13

machine work will be anywhere from 1200-1800 depending on shop.

 

muddslide

New Member

Mar 10, 2003

505

0

0

DAYTONA BEACH

Mar 19, 2004

#14

• Mar 19, 2004

• #14

ARE YOU KIDDING, WOW....at that price i would have to sell a kedney

 

85_SS_302_Coupe

it sucks (I know) to be on the receiving end

15 Year Member

Nov 11, 2003

6,945

1,598

223

Northern KY

Mar 19, 2004

#15

• Mar 19, 2004

• #15

You can expect to have a few K just in the block, not counting a single item in it. The block itself is something like 1500 bucks, which is why a 351W is just better. If you put a nice main gurtle on the 351, you'll be just as strong if not damn close to a 302 R block. Stock 351Ws are 4 bolt mains on the back 3 mains i believe, so it's loads stronger than a stock 302, plus the block is just plain thicker.

 

W

wisconsinboy

New Member

Feb 23, 2004

78

0

0

eau claire wisconsin

Mar 19, 2004

#16

• Mar 19, 2004

• #16

shops are usually 20 a hole and an extra couple to get the top milled and all that stuff. my bill came out to 105 with the nice discount i got for being part of my grade at school and its bored 40 over and the decks milled all that stuff. got some diamond grinded shait with the top of the cylenders but i didnt listen when my auto teacher was talkin so i have no clue what else they did. if your still in school anywhere just have the autoteacher call bout it it works out good in the end. rent a book from the library if you wanna know what your talkin bout too

 

5.0 HOtrain

Founding Member

May 20, 2001

2,247

0

47

New Hampshire

Mar 19, 2004

#17

• Mar 19, 2004

• #17

85_SS_302_Coupe said:

. Stock 351Ws are 4 bolt mains on the back 3 mains i believe, .

Click to expand...

Some years of 351 cleavlands were 4 bolt mains, no 351 windsor ever was.

 

85_SS_302_Coupe

it sucks (I know) to be on the receiving end

15 Year Member

Nov 11, 2003

6,945

1,598

223

Northern KY

Mar 19, 2004

#18

• Mar 19, 2004

• #18

5.0 HOtrain said:

Some years of 351 cleavlands were 4 bolt mains, no 351 windsor ever was.

Click to expand...

Thanks for that correction. I just read where i got that and i mistaked the stocker for the FRPP M-6010-N351 block, which i'm guessing is the part number for the Lightning block. Either way, it does for sure have 3 inch mains, which even at 2 bolts per, they're stronger than the 302's.