Motor just refreshed, brand new CP pistons with upgraded pin package for blower/turbo application. 312ci A4 blocked bored to 4.070, Oliver billet rods, Eagle 4340 crank, ARP hardware throughout. All work done at Bouchers Racing Motors....have all receipts. Block is half-filled to provide added strength.
TFS Fox Lakes Stage 2 heads
- Comp Cams pushrods
- REV springs
- titanium retainers
- Harland Sharp rockers
- valve job and spring test just completed at Bouchers as well
Cam Motion solid roller camshaft spec'ed by Turbo People
Cartech tunnel ram intake system w/fuel rails
Motor is 95% done, just left timing cover and pan off as I have timing covers and sfi balancers for both a '94-95 car and for '93 down cars. You will get motor 100% complete once I know what year car it is going in. Will also include crank trigger if
desired. This motor has produced 906 at the wheels on race fuel with an 88 mm turbo and 660 on pump gas.
Asking $6500 plus shipping. Have dyno sheet if anyone is interested.
TFS Fox Lakes Stage 2 heads
- Comp Cams pushrods
- REV springs
- titanium retainers
- Harland Sharp rockers
- valve job and spring test just completed at Bouchers as well
Cam Motion solid roller camshaft spec'ed by Turbo People
Cartech tunnel ram intake system w/fuel rails
Motor is 95% done, just left timing cover and pan off as I have timing covers and sfi balancers for both a '94-95 car and for '93 down cars. You will get motor 100% complete once I know what year car it is going in. Will also include crank trigger if
desired. This motor has produced 906 at the wheels on race fuel with an 88 mm turbo and 660 on pump gas.
Asking $6500 plus shipping. Have dyno sheet if anyone is interested.