I have some questions on a current build.
Heres a quick run down
Probe 331 kit
stock block
Early twisted wedge heads
TFS stage 2 cam
RPM II fuel injection intake
Fox style 75mm tb w/ egr delete
AFM power pipe
Pro-M 80mm MAS
Motor should be around 10.2-10.5 com ratio
N/A build maybe a little spary
My question is the roller rockers. I looked at a set of Crane Energizer 1.6 ratio rocker and he said they dont work my heads. He said they need to be trick flow rockers. He showed me the push rods he used and the top (maybe a 1/16 down) you could see where they had been hitting the rockers. I have looked a lot of set ups and it seems that almost any rockers can be used. I am thinking that he may of had the wrong length push rod.
So what roller rockers do you guys think I should use?
Also the heads have the o-ring machined around the com chamber.
What part # head gasket do I need?
Last of all, What kind of power and torque can I expect from this combo
thanks
Heres a quick run down
Probe 331 kit
stock block
Early twisted wedge heads
TFS stage 2 cam
RPM II fuel injection intake
Fox style 75mm tb w/ egr delete
AFM power pipe
Pro-M 80mm MAS
Motor should be around 10.2-10.5 com ratio
N/A build maybe a little spary
My question is the roller rockers. I looked at a set of Crane Energizer 1.6 ratio rocker and he said they dont work my heads. He said they need to be trick flow rockers. He showed me the push rods he used and the top (maybe a 1/16 down) you could see where they had been hitting the rockers. I have looked a lot of set ups and it seems that almost any rockers can be used. I am thinking that he may of had the wrong length push rod.
So what roller rockers do you guys think I should use?
Also the heads have the o-ring machined around the com chamber.
What part # head gasket do I need?
Last of all, What kind of power and torque can I expect from this combo
thanks