• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

347 questions

  • Thread starter Thread starter lxwants12's
  • Start date Start date Sep 25, 2005

lxwants12's

New Member
Sep 22, 2004
506
0
0
Sep 25, 2005
#1
  • Sep 25, 2005
  • #1
so just got a question hee.....347 with production block, forged rotating assembly and afr 185 heads with a ridiculous cam....hoping to make 400 to the wheels, but will that block support that power?? and then if i decide to still use my 100 shot of zex dry nitrous??
 

nmcgrawj

Advanced Member
Sep 28, 2003
3,651
4
68
Indianapolis, IN
Sep 26, 2005
#2
  • Sep 26, 2005
  • #2
It will hold 400rwhp...the shot of nitrous will be approaching the line of danger. But i think it will hold it...its all in the tune.
 

lxwants12's

New Member
Sep 22, 2004
506
0
0
Sep 26, 2005
#3
  • Sep 26, 2005
  • #3
ok ok....so if i decide to get a aftermarket block might as well go with a dart huh?? how much is a dart block u think?
 

nmcgrawj

Advanced Member
Sep 28, 2003
3,651
4
68
Indianapolis, IN
Sep 26, 2005
#4
  • Sep 26, 2005
  • #4
Ummmm $1800-2000 im pretty sure. I would only give up that kinda change for one if i was gonna use it to go WAAAYYYY past the stock block capacity. Not to only go a little past it. I would make my investment well worth it.
 

Grn92LX

Fidanza Man!
Founding Member
Jan 14, 2001
6,819
64
129
New York
Sep 26, 2005
#5
  • Sep 26, 2005
  • #5
No need for a heavy forged crank. Stick with a scat cast steel crank.

Nates correct, if this is your combo, use a stock block. I still say you're better off having your TW heads ported, but the afr 185 will work well. If you're gonna sell the TW heads and buy new heads, look into edelbrock victor jr's.

Where on LI are you?
 

Rick 91GT

Mustang Master
Nov 29, 1999
9,692
95
99
PA
Sep 26, 2005
#6
  • Sep 26, 2005
  • #6
If you do not plan on going with an aftermarket block in the future I agree stay with the cast crank it will save you some money.

The DART based motor will run you around $2000 more plus you'll need an oil pan and a few other parts specific for that block and the 4 bolt caps. Just for comparison sake I build cast crank strokers in the $1950 range, forged crank strokers $2450 range and DART Sportsman based $4350 range.

400hp is pushing a stock block, keep the rpms under 6500, good machine work and good tune. We broke 2 stock blocks a little over 5400RWHP this year...but we rev them high
 
You must log in or register to reply here.

Similar threads

C
347 advice
  • CRonaldo773
  • Jan 27, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
5
Views
369
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jan 28, 2026
2000xp8
Engine Suggestions on an engine rebuild. Stock cam/GT40Ps or aftermarket on both for a fun weekend driver?
  • MadSquirrelTech
  • Apr 28, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
23
Views
1K
Fox 5.0 Mustang Tech May 7, 2026
MadSquirrelTech
My next project , a 428 build!
  • horse sence
  • Jul 29, 2026
  • Classic Mustang Specific Tech
  • 9 10 11
Replies
213
Views
5K
Classic Mustang Specific Tech Wednesday at 6:44 PM
DadLife0724
Need some camshaft guru advice on power loss from supercharger to nitrous
  • TTSaleen
  • Dec 1, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
18
Views
978
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Dec 29, 2025
revhead347
351w turbo build.... Turbo guys teach me things...
  • Kid wita 5oh
  • Oct 22, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
13
Views
2K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 23, 2025
General karthief
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?