347 stroker finished, and runs! (PICS)

mo_dingo · Jun 3, 2004

Where is the girl that was posing on your car? Gotta get her back to do some more pics w/ the new motor!

Ditto on the work you have done. I can't remember, but is the car fully framed for the track?
Scott

1105 · Jun 3, 2004

Looks good Mike. That coating wont discolor will it?

OinkAodeOink · Jun 3, 2004

its going to be a street strip and show car, might end up liking it too much and drive it all the time. we'll see i guess

The coating shouldn't discolor unless i run lean..worse case, it dulls up slightly, then i just polish it back out with aluminium polish. No big deal

94TURBO5 O · Jun 3, 2004

go.rei GT said:
That is some excellent work!!! I can't wait to see it finished!

I think oink's wins out with the molding, and wire hiding, ect. (although both are incredible!!) I think its the opposite when talking about exteriors though...

I surrender, that engine bay is flawless.
Excellent work Mike I like seeing every attention to detail!

Numbles · Jun 3, 2004

Unbelievable. I just spent the last 10 minutes just getting the dirt off of my engine bay but screw it. I gotta move alotta stuff into the fender wels before I start wasting more time.

Good job on the spotless engine.

89 blue lx · Jun 3, 2004

yeah i still cant get over the polished injectors in your other post

VIPERn94Five-0 · Jun 3, 2004

i wanna see some pics of it all put back together....and i agree Mike has THE BEST engine bay....and probably the most dedication on these forums....

...btw i think that chick was his girlfriend....

.....Mike got a question for ya....is there room for normal sized rims/tires up front??...it looked in one pic like it may be a tight fit for anything but skinnies but maybe its just the angle of the pic taken....

Anthony

OinkAodeOink · Jun 3, 2004

yea wheel fitment isnt a problem, Its just an illusion. Those pieces are in front of the tire.

mo_dingo · Jun 3, 2004

VIPERn94Five-0 said:
...btw i think that chick was his girlfriend....

Really? It must be nice to have a g/f that is "model" quality! A bonus when it comes to the photo shoot for the magazines. Speaking of which, I have absolutely no doubt he could get on a cover.

A friend of mine did a Hyundai w/ lambo doors. Ended up on the front cover of a magazine for it. Sure enough, just to the side of his car, was his girlfriend posing. Talk about JEALOUSY!!!!!
Scott

89 blue lx · Jun 3, 2004

mo_dingo said:
Really? It must be nice to have a g/f that is "model" quality! A bonus when it comes to the photo shoot for the magazines. Speaking of which, I have absolutely no doubt he could get on a cover.

A friend of mine did a Hyundai w/ lambo doors. Ended up on the front cover of a magazine for it. Sure enough, just to the side of his car, was his girlfriend posing. Talk about JEALOUSY!!!!!
Scott

i dunno jealous of a hyundi? it would have to be the coolest hyundi ever

nonlocality · Jun 3, 2004

that is BAD@$$ cant wait to see some slips on it oink

mo_dingo · Jun 4, 2004

89 blue lx said:
i dunno jealous of a hyundi? it would have to be the coolest hyundi ever

Dare I even comment? What do I say, what do I say?

It's HYUNDAI ya......aaarrrgg.....

I guess that last post was useless without pics. I'll see what I can do.
Scott

89 blue lx · Jun 4, 2004

OinkAodeOink · Jun 5, 2004

ok, another update... Car is running, and should be drivable now.. going to test it out tommorow morning.

Still need to wash the car, wheels, interior, and detail/clean the engine bay, and im set. Will take more pics with better lighting tommorow! Still need to pull that ugly fuel gauge hose, and make a cover for the coil and turbine housing. Im loving this thing all over agian.

95GTvert[bv12] · Jun 5, 2004

your car is insane i wish i could have mine looking 1/4 as good as your dose....one of these days...but congrats let us knwo how she is on the street tommarow....How are you going to tune the car?

OinkAodeOink · Jun 5, 2004

tweecer r/t.. going to go real conservitive, untill i can get my hands on a wideband 02 setup, and a dyno

95GTvert[bv12] · Jun 5, 2004

thats a good idea you realy dont need the dyno just a EGT guage or a good wideband set up.

randomjoker · Jun 5, 2004

wowowowow nice.

89 blue lx · Jun 5, 2004

holy shyt dude that is amazing i think that its cool if you look in the second pic the inlet tubes almost disappear and you are putting a cover on the tubine housing right? cuz polishing that would kinda be pointless huh?

94TURBO5 O · Jun 5, 2004

I am absolutely speechless, like watching a kid in a toy store. That is some amazing work and you are an inspiration to us all.

347 stroker finished, and runs! (PICS)

mo_dingo

1105

I AM the random post master...bow down

OinkAodeOink

94TURBO5 O

New Member

Numbles

Active Member

89 blue lx

VIPERn94Five-0

OinkAodeOink

mo_dingo

89 blue lx

nonlocality

mo_dingo

89 blue lx

OinkAodeOink

95GTvert[bv12]

OinkAodeOink

95GTvert[bv12]

randomjoker

New Member

89 blue lx

94TURBO5 O

New Member

Similar threads

347 stroker finished, and runs! (PICS)

I AM the random post master...bow down

New Member

Active Member

New Member

New Member

Similar threads

Privacy & Transparency

Privacy & Transparency