jballa - I imagine if he doesn't 'own' the car yet, the current owner is probably not going to like that idea
Now be very careful of someone saying that have a stroker because to most it would be difficult to tell. I had a friend that was told this and it ended up being a 302 upon teardown.
A few tips as alluded too:
Check piston travel from TDC to BDC by pulling out spark plug on #1 cylinder (passenger/front towards radiator) and useing a clothes hanger or similar and turn the engine over by the harmonic balancer bolt. If it measures 3.4" (roughly) from TDC to BDC you have a 3.4" stroke which is the 347.
3.0" stroke is a 302 for your info, so you do have a little room for error but only about .4"
Checking the balancer is a good 'additional' way to confirm the previous step. If it is aftermarket and says 28 or 0*, that is an even better indication.
When most rebuild the engine they typically keep the stock balance of 50*, which usually ends up keeping the stock balancer style.
If you are familiar with the power of the 5.0L and how it feels you could test drive...but the seat of the pants can be deceiving.
Also looking for aftermarket heads/cam (sound/behavior)/intake is a good indication as well to help further the 'piston travel' step.
Good Luck!