347 & tweecer install

[FEESER 94 COBRA]

ok guys i am about ready to make my dreams come to life in about 2 weeks. I just got a 347 short block with probe pistons. I paid $1,950 for the entire short block except the cam thats one of my questions i have a f303 cam allready should i put that in or go with somthing else? i will be running edelbrock rpm performers 2.02 valves,stock cobra intake for now then holley systemax. My other question was about the tweecer is this really going to be as simple as it seems?I am not that all that with computers but it really seem pretty self explanitory any thing i should watch out for? How well could this combo work? any feed back at all would help

 

[xYoung347x]

dont go with the f cam get something else to get full potiential out of the stroker motor. It seems like a stout combo you got there except for the cam. I don't know anything about the Tweecer but I heard anyone can learn it but it takes time. Good luck man.

 

[iluv95stangs]

Sounds like a good combo. The tweecer is a hard battle by yourself. You will spend many, many hours trying to get everything perfect. Tweecer has its own board that can help you. If you have patience then you will be able to make it but otherwise it may be wiser to let someone else do it.