Hypothetically they would work. If they have big valves, they may not. Porting isn't going to affect whether the cylinder heads will fit or not, that only allows for more air into/out of the cylinder. Check PTV before starting the motor - things could get ugly, quick.
Hypothetically they would work. If they have big valves, they may not. Porting isn't going to affect whether the cylinder heads will fit or not, that only allows for more air into/out of the cylinder. Check PTV before starting the motor - things could get ugly, quick.
yea i asked about the porting not because i thouhgt it would affect the fit but because i didnt know if they were pretty much the same heads as we have now or if they would imporve flow. thanks