• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

351 or boss

  • Thread starter Thread starter 86mustang5.oh
  • Start date Start date Jan 27, 2006

86mustang5.oh

New Member
Apr 5, 2005
125
0
0
battle creek mi.
Jan 27, 2006
#1
  • Jan 27, 2006
  • #1
ok well i can either get a 351 or i can get a piar of clevland heads for the 302 and i was wondering if i got the clevland heads what woudl i have to do to get them on there and do they make a fuel injected manifold for that....thanks
 

vristang

15 Year Member
Mar 31, 2005
4,933
101
124
Seattle
Jan 27, 2006
#2
  • Jan 27, 2006
  • #2
I played with the same idea a few years back.
I never found an aftermarket manifold.
All the racers I talked to said the same thing, the cleveland heads flow very well, but there is a low end power loss that is very tough for a street car to handle.
As for getting the heads on the windsor it is fairly standard stuff for most machine shops. The Ford Racing catalogs used to have instructions in the back, but I have not checked in the recent catalogs for this.

Obviously, I went with the 351.

Maybe Cleveland heads would be good on a 351w? I never considered that option.

jason
 

JBeezy53

Member
Dec 28, 2003
559
1
19
Sacramento, Ca
Jan 28, 2006
#3
  • Jan 28, 2006
  • #3
I would go with the 351.

The cleveland heads were great back in the day but the new technology is that much better. The just wonder how great the cleveland motors would have been if the aftermarket would have ever really did anything for them. Also I hear that they are really high rpm pieces which would mean they would be best for racing.
 

Modular2v

Founding Member
Jun 30, 2002
3,222
23
99
oklahoma
Jan 28, 2006
#4
  • Jan 28, 2006
  • #4
go with the 351.....i have a whole cleveland motor, and i have a 331 stroker , i have toyed and priced the idea of having the cleveland heads modified to fit the 331....it would cheaper and more cost effective for me just to gow with a set of afrs......You have to modify the water jackets on the heads to match up with the block. Go witht the windsor!
 

aleborjas

New Member
Sep 11, 2005
610
0
0
Jan 28, 2006
#5
  • Jan 28, 2006
  • #5
Modular2v said:
go with the 351.....i have a whole cleveland motor, and i have a 331 stroker , i have toyed and priced the idea of having the cleveland heads modified to fit the 331....it would cheaper and more cost effective for me just to gow with a set of afrs......You have to modify the water jackets on the heads to match up with the block. Go witht the windsor!
Click to expand...

+1 go with 351 and get a good set of aluminum heads! go with AFR's or TFS
 

RMODEL65

Member
Jul 6, 2005
313
1
18
brunswick ga
Jan 28, 2006
#6
  • Jan 28, 2006
  • #6
drill water passages in the face of the intake surface because the cleveland is a dry intake no water goes thru and a couple in the bottom where the head and block meets bush proformance makes a manifold to adapt and edelbrock has new cleveland alum heads out that feature 2v ports and 4v closed combustion chambers the stock heads to look for are the austrailan cleveland head u can get these from some of the classic mustang dealers they feature the 2vports/4v chamber! the only clevelands that have problems with low end torque are the 4vs!!
 
You must log in or register to reply here.

Similar threads

K
Engine Gt40p vs 180 procomp
  • Kleinjj27
  • Oct 27, 2026
  • Fox 5.0 Mustang Tech
Replies
17
Views
511
Fox 5.0 Mustang Tech Nov 3, 2026
Kleinjj27
K
5
New to this
  • 5.ohCS
  • Nov 1, 2026
  • 2005 - 2014 S-197 Mustang -General/Talk-
Replies
0
Views
108
2005 - 2014 S-197 Mustang -General/Talk- Nov 1, 2026
5.ohCS
5
Y
Speed density 302 to carb 351W
  • yaboity
  • May 29, 2026
  • Fox Engine Swaparoo
Replies
1
Views
231
Fox Engine Swaparoo May 29, 2026
AeroCoupe
P
Vacuum
  • ProTechAutoServices
  • Aug 1, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
13
Views
346
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Aug 2, 2026
Noobz347
Engine New factory manifold no start
  • Fishnchips
  • Oct 15, 2026
  • 1994 - 1995 Specific Tech
Replies
13
Views
412
1994 - 1995 Specific Tech Oct 22, 2026
DadLife0724
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?