I just bought a 1989 Foxbody that has the 355 Probe stroker motor, i cant find much of any information on the stroker kit itself. Its still just a stock 302 block right? the build list i received says a "probe 8.2" deck" those that mean an aftermarket shortblock?
Its a nitrous car making 560whp/780tq on a 150 shot. Previous owner ran it on the track and street with that shot no issue and said they wouldve done a 200shot if fuel wasnt an issue.
Could the block handle that?
Build list:
Edlebrock e street heads 170 cc valve springs
X303 cam
Trickflow intake
Probe 8.2" deck 355 c.i.d stroker kit
3.48"cleaveland
5.5" crower 4340 steel sportsman rods (busged) 3/8" bolts
4.030" probe pistons (362g)
in-line valve relief & pins
childs and albert rings 1/16" 3mm ring package
main rods and bearings (probe)
apr 2 main bolt studs
0.0949
Its a nitrous car making 560whp/780tq on a 150 shot. Previous owner ran it on the track and street with that shot no issue and said they wouldve done a 200shot if fuel wasnt an issue.
Could the block handle that?
Build list:
Edlebrock e street heads 170 cc valve springs
X303 cam
Trickflow intake
Probe 8.2" deck 355 c.i.d stroker kit
3.48"cleaveland
5.5" crower 4340 steel sportsman rods (busged) 3/8" bolts
4.030" probe pistons (362g)
in-line valve relief & pins
childs and albert rings 1/16" 3mm ring package
main rods and bearings (probe)
apr 2 main bolt studs
0.0949