3G 130 alt upgrade for 86 stang probs???

bryanrevans

New Member

Sep 10, 2004

296

0

0

Chicopee,Mass

Apr 6, 2005

#1

• Apr 6, 2005

• #1

Ive read many different instructions,however I have the 2 plugs small one just plugs into new 3g. 4 guage fused wire from alt to starter solenoid.Leave TWO black w orange wires alone.Am I good so far?My problem is I have NO White wire to hook up to white that is hanging from New 3g alt.The only wires I had from STOCK alt where 1)plug with 2 black w/orange wires.2)other small plug that goes into new alt.Thats it.

 

HISSIN50

"How long does it take to get help in here?

15 Year Member

Nov 29, 1999

31,179

34

129

Apr 7, 2005

#2

• Apr 7, 2005

• #2

Bryan, Hook up with Daggar. he did have a nice write up in his sig (for the alt swap for a 4 eye - he has an 86, IIRC), but i think it went bye bye in the meltdown. he might still have a write up saved or at least be able to provide you with the low down.
good luck.

 

Stang8URMPRT

Active Member

Dec 28, 2003

1,100

1

38

Daytona Beach, FL

Apr 7, 2005

#3

• Apr 7, 2005

• #3

The "white wire" that plugs into the new alt can be spliced and used. It's also a stator wire. All you do is splice that wire, and run it to the stator connection on the 3G.

 

bryanrevans

New Member

Sep 10, 2004

296

0

0

Chicopee,Mass

Apr 7, 2005

#4

• Apr 7, 2005

• #4

Thanks guys.What on my harness does the other end of plug(w/white wire)splice in to??

 

04sleeper

Founding Member

Jun 22, 2002

2,674

14

89

Dallas, TX

Apr 7, 2005

#5

• Apr 7, 2005

• #5

bryanrevans said:

Thanks guys.What on my harness does the other end of plug(w/white wire)splice in to??

Click to expand...

Not too sure about an 86 but the same plug that has the 2 black/orange wires also has a white/black wire in it.

I used a peice of 4 gauge wire to replace the 2 black/orange wires, because the 2 black/orange wires splice into 1 wire down the harness further , and bought a new plug from www.fordfuelinjection.com to hook up the white wire.

Like this.

Does the plug with the black/orange wires have another wire in it?

 

bryanrevans

New Member

Sep 10, 2004

296

0

0

Chicopee,Mass

Apr 7, 2005

#6

• Apr 7, 2005

• #6

Mine doesnt.I untaped everything in that harness.Just the two 10g blackw orange wires.And the other small plug that goes into the 3g alt has just 2 wires yellow and green.Every instruction Ive looked at looks TOTALLY diff.Now there is 1 yellow wire in that harness that goes into the passager side firewall?????

 

04sleeper

Founding Member

Jun 22, 2002

2,674

14

89

Dallas, TX

Apr 7, 2005

#7

• Apr 7, 2005

• #7

If you want to simplify things just run the white wire to a switched power source when the car is on. It is just an excitor wire.

 

bryanrevans

New Member

Sep 10, 2004

296

0

0

Chicopee,Mass

Apr 7, 2005

#8

• Apr 7, 2005

• #8

Like where?Any sugestions?Thanks for the help!!!!

 

Stang8URMPRT

Active Member

Dec 28, 2003

1,100

1

38

Daytona Beach, FL

Apr 7, 2005

#9

• Apr 7, 2005

• #9

bryanrevans said:

Like where?Any sugestions?Thanks for the help!!!!

Click to expand...

Ok, you have to tap into that white wire on the existing plug that DOES plug into the 3G from your old alternator... There is a white wire there with black stripe. You just tap off of that, because that also is a stator wire. You can cut it, and add a wire to it for the individual stator wire for the 3g.

 

bryanrevans

New Member

Sep 10, 2004

296

0

0

Chicopee,Mass

Apr 7, 2005

#10

• Apr 7, 2005

• #10

No just 2 wires in that smaller plug.1 green,1 yellow.Crazy isnt it??

 

bryanrevans

New Member

Sep 10, 2004

296

0

0

Chicopee,Mass

Apr 7, 2005

#11

• Apr 7, 2005

• #11

I have 5 TOTAL alternator harness wires.2 1yellow,1green wires into smaller plug.2 10g blackworange wires into larger plug.1 yellow wire going into passager side firewall.Help!!!!!!!!!!!!!I plug small plug into 3g alt.I leave larger plug alone.run 7 ftof 4g wire from rear alt post to pos side of starter solenoid.Then what??????????

 

bryanrevans

New Member

Sep 10, 2004

296

0

0

Chicopee,Mass

Apr 7, 2005

#12

• Apr 7, 2005

• #12

Help what happens when you dont have that white wire???

 

D

Daggar

New Member

Jul 19, 2004

3,902

5

0

Apr 7, 2005

#13

• Apr 7, 2005

• #13

There's a couple of different ways you can do this. The simplest way to do it would be to get a 3 wire connector from the dealer or PA-Performace or a junk yard. That will give you the missing white wire. You can splice that right into the white wire/grey connector that plugs into the back of the 3G. No muss no fuss. If you're handy with a soldering iron and couple pieces of shrink tube then this is the way to go. If you need a couple pics, let me know. I'll post them when I get home.

 

04sleeper

Founding Member

Jun 22, 2002

2,674

14

89

Dallas, TX

Apr 7, 2005

#14

• Apr 7, 2005

• #14

Maybe this will help.
View attachment 517944

 

bryanrevans

New Member

Sep 10, 2004

296

0

0

Chicopee,Mass

Apr 7, 2005

#15

• Apr 7, 2005

• #15

Thanks both of you!!!!That pic shows a plug with 3 wires.Thats what I need to do since my small plug has only 2 wires.Big help as always!!!!!!I love this site!!!!!!!!!

 

bryanrevans

New Member

Sep 10, 2004

296

0

0

Chicopee,Mass

Apr 7, 2005

#16

• Apr 7, 2005

• #16

Just to complete my period of instruction on alternator harness 101 could someone tell me what that thicker yellow wire runing to the pasager side firewall is?????

 

bryanrevans

New Member

Sep 10, 2004

296

0

0

Chicopee,Mass

Apr 7, 2005

#17

• Apr 7, 2005

• #17

anyone know???