• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-

4.10 Gear videos in daily driving

  • Thread starter Thread starter Spreadman
  • Start date Start date Dec 2, 2004
Prev
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • …
  • 9
Next
First Prev 4 of 9 Next Last
2

2003BlackGT

New Member
Jul 25, 2003
92
0
0
Granville, Ohio
Dec 9, 2004
#61
  • Dec 9, 2004
  • #61
Thanks for the great videos! Job well done Mark
 

hotmustang331

Active Member
Apr 29, 2004
2,967
3
48
Bastrop,TX
Dec 9, 2004
#62
  • Dec 9, 2004
  • #62
I watched Vid #7...awsome, car sounds good.Sounds about like me hitting 3rd with the 3.27s...as far as performance, seems about normal about the same as 3rd with 3.27s...but I didnt see the lower gear vids (dial up...30-40 minutes for #7 LOL) I am sure that where 4.10 will shine.Funny in about 3 1/2 - 4 seconds, a little less that what you held it, my 66 goes from around 70-75 indicated to 110 indicated (20 MPH off)...what a rush...you punching it just reminded me of my drop to 2nd at 50-55 in the old stang. Anyways I will try that 70-90 thing in my 04 tomorrow, just to compare.Nice vid BTW.
 

Spreadman

two wheels
Founding Member
Nov 29, 1999
10,904
3
0
Houston, TX
Dec 10, 2004
#63
  • Dec 10, 2004
  • #63
squares98 said:
Everyone says the mpg's bother them, that should have nothing to do with it. The increased constant noise levels should be the concern because that can get a little annoying. 4.10's do have a little more uumph, but if you are not a lead foot and just like to cruise in peace without feeling all wound up maybe a 3.73 will make you happier. They still get you moving quicker, and you get longer gears too.
Click to expand...
I love how my car sounds. And if you have Flowmasters, 4.10's will put you outside of the drone-zone, so it shouldn't be a problem.

If you drive the speed limit, your mpg will not suffer anymore than with stock gears.
 

Gearbanger 101

Straight Outta Locash
20+ Year Stangneter
Aug 10, 2002
9,457
1,377
234
Ontario, Canada
Dec 10, 2004
#64
  • Dec 10, 2004
  • #64
The gear RPM ain't bad, but man you've got some brutal drone! Guess I know I'm not going with a set of Magnapac's.
 

Spreadman

two wheels
Founding Member
Nov 29, 1999
10,904
3
0
Houston, TX
Dec 10, 2004
#65
  • Dec 10, 2004
  • #65
Gearbanger 101 said:
The gear RPM ain't bad, but man you've got some brutal drone! Guess I know I'm not going with a set of Magnapac's.
Click to expand...
It's not drone. It's just loud. Drone rattles fillings. Mine hums.
 
S

sixstringthing

New Member
Aug 11, 2003
297
0
0
Dec 11, 2004
#66
  • Dec 11, 2004
  • #66
I didnt hear any drone in the vids, its just a loud exhaust
 

Gearbanger 101

Straight Outta Locash
20+ Year Stangneter
Aug 10, 2002
9,457
1,377
234
Ontario, Canada
Dec 11, 2004
#67
  • Dec 11, 2004
  • #67
That part where the exhaust is bellowing so loud, that you're not able to hear him speak.....that's drone. And it;s really pronounced between 1800 and 2200rpm. Yes, I admit it's a really loud exhaust, and sounds great at all levels but the dreaded drone is still there just the same and it's amongst the loudest I've ever heard. You can really hear it right around the 00:40 mark of the 3rd video.
 

Spreadman

two wheels
Founding Member
Nov 29, 1999
10,904
3
0
Houston, TX
Dec 12, 2004
#68
  • Dec 12, 2004
  • #68
Trust me on this....what you hear is my crappy camera, with a crappy mic, picking up all the bass from the exhaust. It doesn't drone. I drive the car, I've had flows, I know what drone is, and these don't drone.
 
D

Darkhorse845

Banned
Nov 17, 2004
101
0
0
Las Vegas,Nevada
Dec 13, 2004
#69
  • Dec 13, 2004
  • #69
Thanks for the vids Spreadman it's much appreciated!
 

Bill9000

Member
Oct 15, 2004
182
0
16
Dec 13, 2004
#70
  • Dec 13, 2004
  • #70
Spreadman said:
I love how my car sounds. And if you have Flowmasters, 4.10's will put you outside of the drone-zone, so it shouldn't be a problem.

If you drive the speed limit, your mpg will not suffer anymore than with stock gears.
Click to expand...

Once again thanks for the awesome vids, I'm installing FRPP 4.10's (already on order) thanks to your cids helping the decision along.

I agree, that with the 4.10's the rpm will be slightly higher, enough to get away from the 2100rpm drone area... I just put 1-chamber flowmasters on my car, and while I feel it sounds good, I want it louder, I'm installing an O/R H pipe, and I think that that gear change will really help the drone, cause right now, freeway runs about 2100rpm, right in the drone... am I right? cause the with 1-chambers staying out of the 2100rpm range is probably gonna be important after the H-pipe installed.
 
9

98 convertable

New Member
May 27, 2004
31
0
0
tallahassee FL
Dec 14, 2004
#71
  • Dec 14, 2004
  • #71
jrc_03_gt said:
Wrong! Its dead on the nuts. I have checked it ! I have a 3650 tremec trany.
Click to expand...

I got rid of my spped cal. Wouldn't even register rpm's. I have 3:73's and run 80mph @2900-3000. My buddy has a stock 98 cobra with 4:10's that runs 70 mph @ 3000rpm. A little to high for my liking. When I get my supercharger installed, Im taking the 3:73's out, and installing 3:55's.
 

Team801

Member
Dec 17, 2003
104
0
16
Salt Lake City, UT
Dec 15, 2004
#72
  • Dec 15, 2004
  • #72
Wow, great post!!!

This is very informative, I'm thinking about getting 4.10's after watching that video.
 

Ghostface

Member
Jan 11, 2004
226
0
17
Dec 16, 2004
#73
  • Dec 16, 2004
  • #73
on the second vid where your driving from a dead stop, are u starting the car in first or second? If it's first it seems like ur only on it for a second and shifting way before your even at 10 mph. Does that get annoying having 1st be so short? Thanks for the great vids..
 

Spreadman

two wheels
Founding Member
Nov 29, 1999
10,904
3
0
Houston, TX
Dec 16, 2004
#74
  • Dec 16, 2004
  • #74
Ghostface said:
on the second vid where your driving from a dead stop, are u starting the car in first or second? If it's first it seems like ur only on it for a second and shifting way before your even at 10 mph. Does that get annoying having 1st be so short? Thanks for the great vids..
Click to expand...
Started off in first. No, it doesn't get annoying. The car makes some very nice noises during shifts (exhaust related) so I don't mind it. But that was starting off slow, if I lay into it, I can go much higher.
 

AirWolf87

New Member
Mar 14, 2004
382
0
0
L I, NY
Dec 18, 2004
#75
  • Dec 18, 2004
  • #75
Oh man, that just got me all confused again! I was sure that i was going with 3.73s cuz i drive about 20 miles every day on the highway at about 75mph and having the rpms above 3200 scared me. but ur car looks like so much fun! now i dont know what to do.
oh...and heres the question......
I live in NY....anyone ever driven 410s on light snow??? my car is a dd so it sees light snow quite often
 

02LaserRed2V

New Member
Jul 30, 2004
379
1
0
Augusta, GA
Dec 18, 2004
#76
  • Dec 18, 2004
  • #76
Even though I already have 4.10s, I still find the vids to be quite interesting. I noticed the 5-speed revs higher than an auto (I rarely go above 3K RPM unless I floor it) on partial throttle. Even when I "manually" shift my auto, it still looks and sounds way different.

<=== never rode in or driven a manual before.
 
R

raykrv6a

New Member
Sep 7, 2004
153
0
0
Maple Grove, MN
Dec 19, 2004
#77
  • Dec 19, 2004
  • #77
jrc_03_gt said:
Wrong! Its dead on the nuts. I have checked it ! I have a 3650 tremec trany.
Click to expand...

Yep, your right on.

http://tchracing.com/tech/gearcalc....m&givenval=90&givenvaltype=MPH&selectedgear=5
 

LaserCobra

Founding Member
Dec 11, 2001
497
0
0
Tampa, FL
Dec 20, 2004
#78
  • Dec 20, 2004
  • #78
I never knew so many people were hesitant to install 4.10's
They are the ONLY gear to put in a 4.6. You are wasting your time with anything else. I had them in my 98 for years without thinking twice about it. Power was only a dropped gear away.
BTW- I was pushing 3k @ 70mph
Either you don't have 4.10's or your calibration is off. If Corral.net's calc page was working, I'd show you.
I should know. I drove the same 20 miles of highway twice a day for 2 years straight going to school and work. The speed limit was 70...

*EDIT*
Man- I never knew there was that much difference in the trans line. I sit corrected.
 
A

AtlanticGT

New Member
Dec 23, 2004
38
0
0
Dec 23, 2004
#79
  • Dec 23, 2004
  • #79
Great post. Answered many questions I had.
 
1

1_QUICK_GT

New Member
Dec 22, 2004
33
0
0
Houston TX
Dec 23, 2004
#80
  • Dec 23, 2004
  • #80
i live in Houston and drive my coupe with 4.10's all day. lotsa fun.
 
Prev
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • …
  • 9
Next
First Prev 4 of 9 Next Last
You must log in or register to reply here.

Similar threads

6
  • Locked
2001 Bullitt, Kennebell S/C
  • 68resto-stang
  • Apr 6, 2012
  • SN95 Mustangs For Sale (1994-04)
Replies
1
Views
6K
SN95 Mustangs For Sale (1994-04) Sep 23, 2012
Liljohn336
L
small video of my mustang!
  • Foxfan88
  • Sep 10, 2007
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
7
Views
865
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Sep 11, 2007
Foxfan88
3.73 Gears videos in daily driving
  • merc123
  • Jul 3, 2005
  • SN95 4.6L Mustang Tech
  • 2
Replies
38
Views
16K
SN95 4.6L Mustang Tech Sep 23, 2005
01 Cobra
drag strip video
  • Foxfan88
  • Nov 11, 2007
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
6
Views
842
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Nov 12, 2007
Foxfan88
Youtube Video Ticking Help!!
  • AnthonyR23
  • Jul 31, 2007
  • Fox 5.0 Mustang Tech
Replies
6
Views
2K
Fox 5.0 Mustang Tech Aug 1, 2007
AnthonyR23
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?