• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-

4 banger to v8 selling problems?

  • Thread starter Thread starter stangster50
  • Start date Start date Nov 30, 2008
  • 1
  • 2
Next
1 of 2 Next Last

stangster50

New Member
Nov 19, 2006
129
0
0
cranston ri
Nov 30, 2008
#1
  • Nov 30, 2008
  • #1
so.... im going to convert a 93' original 4 banger auto, into a 8cyl 5 spd... im planning on selling this, as i have too many stang projects, and i figured this was a good way to fund these projects. anyway.... im looking at ebay, and i noticed that everyone makes a big deal in their auction saying that "this is an original v8 car. not a conversion!" and i noticed that mostly stock originals are going for $3-6,000, and nicer, and severely more modded converted cars cant get $5,000.

so whats the deal? why if they are already modded are people wanting an original v8 car? its obviously not about pure... or they wouldnt want a modded car...
it makes no sense to me since a 4 banger with 60,000 miles will probably be more solid then a v8 at 60,000 miles.. they just dont have the abuse, they never made enough power to hurt themselves... ect..

any ideas?
 
R

RycheGT

Member
May 31, 2005
73
0
6
Thomasville, NC
Nov 30, 2008
#2
  • Nov 30, 2008
  • #2
A lot of ppl want an original V8 car. The only advantage to a conversion car is insurance is cheaper. The draw backs to a conversion are not knowing if it was done right, or if its a hack job.
 

1991notchbackLX

Active Member
Dec 25, 2007
1,483
47
48
New York
Nov 30, 2008
#3
  • Nov 30, 2008
  • #3
unmolested fox bodies are getting harder and harder to find, the draw of a 4cyl conversion used to be the lower insurance rates seeing as the car could still be registered as a 4cyl even with the bigger motor... the problem with people shopping for a fox is that most in the market are car guys... and no car guy worth anything wants to buy someone else's dream, they want to build their own... i passed up several 87-93 coupes that were WAY faster than mine before finding my 91, which was bone stock down to the AM/FM radio/cassette haha

just my .02
 

fanopj1

New Member
Oct 17, 2006
17
0
0
Palm Coast, Florida
Nov 30, 2008
#4
  • Nov 30, 2008
  • #4
I personally do not have a problem with the 4 to 8 cylinder conversions. Probably because I have done one. My original 5.0 was rusting away, and when I moved to FL., I found a 4 cyl in great shape and converted everything over, replacing ALOT of parts in the process. I understand that if not done right, they are worthless. I am buliding my car for me, the way I want it, not concerning myself with resale value. Some people are just purist, which is fine. All told, I have a 5.0 built by myself, my way, at alot less money than an unmolested, original 5.0. If money was no object, believe me, I'd be first in line for an original. Just my .02
 

wythors

Get off my lawn!!!
Founding Member
May 17, 2000
2,277
35
69
C Addle
Nov 30, 2008
#5
  • Nov 30, 2008
  • #5
As previously stated, most people don't want to buy a car that has major modifications. Personally, I won't even consider a car that has had any mechanical mods done to it at all, unless they were done by a professional that I trust and I'd never consider a conversion car under any circumstances.

Another thing to consider is that you will never come close to recovering anything close to the cost of any mods. You're lucky to get ten cents on the dollar for what you "invest" in a car.
 

Beasty306GT

Active Member
Dec 19, 2002
671
4
28
Oxford,Mass
Nov 30, 2008
#6
  • Nov 30, 2008
  • #6
Lot of people wont buy it.... could have trouble registering an x 4 banger..so when u go to get an inspection the computer will see it doesnt match with the vin # ...i personally would never buy a 4 to 8 swap
 

Mustang5L5

That is…until I whipped out my Bissell
Mod Dude
Feb 18, 2001
43,215
17,899
224
Massachusetts
Nov 30, 2008
#7
  • Nov 30, 2008
  • #7
I personally wouldn't buy one. If i looked at a 5.0 car and found it was a 4-banger...i walk away. That's already a sign of major modifications to the car.

Plus how well was the conversion done? Were the brake lines rerouted or just bent out of the way? Were the brakes changed to 5.0 brakes? Is the wiring spliced...or swapped with all factory harnesses?

I want a car built by Ford. Who knows what level of detail a person doing a V8 swap into a 4-banger would take.
 

fanopj1

New Member
Oct 17, 2006
17
0
0
Palm Coast, Florida
Nov 30, 2008
#8
  • Nov 30, 2008
  • #8
i understand everyones negative opinion about the swap, but think about what the OP is saying. Nobody knows the mechanical ability or understandings of a person doing mods to their cars. How would one know if a H/C/I swap was done right, or a five lug conversion, or rear disc brake upgrade? How many rear end gears have been changed, and are they done correct? The same holds true for a V8 swap. Same concerns, right?
I still believe that a 4cyl to 8cyl swap, in my eyes, is no better or worse. Again, I know how much time a dedication to detail I put into mine, so I am alittle biased. Nothing was left in the 4 cyl, except the body. ALL harnesses, fuel and brake lines, K-member, rear end, every nut and bolt was gone through.
I would not walk away just because of the conversion. If the work was poorly done, being a swap or mods to a 5.0, than anyone would have second thoughts.
 

Beasty306GT

Active Member
Dec 19, 2002
671
4
28
Oxford,Mass
Nov 30, 2008
#9
  • Nov 30, 2008
  • #9
The problem is that you dont know if some joe shmoe hacked it together...Yea i might look descent but i would not even look at it and i would straight out walk away...If you know your cars then you know what to look for other than that..i would never buy one
 

SVT32VDOHC

waiting for the next hack atta
Founding Member
Nov 22, 2001
3,501
28
119
Motor City
Dec 1, 2008
#10
  • Dec 1, 2008
  • #10
I got tons of calls on my car within a few weeks. Out of say 7-8 calls only 2 had a problem with it being a 4cyl car. These people were looking for mint, original everything cars...WHEN MY AD CLEARLY STATES IN AUTOTRADER WHAT IS DONE TO THE CAR. Those two people can't read, and are dreaming if they think an all original V8 notchback is only asking 7,500 dollars.

They ALL had a problem with my black car being a salvage title though. BUT...I found a guy who didn't care. He wanted a rust free, clean, nice, dependable 5.0 car and found one...and he bought it. It took me only 2 months to get it gone. I got $6,300 for it. You remember my car...it was nice, so do it all right.
 

1990Coupe

Founding Member
Mar 11, 2002
1,462
132
114
Toms River NJ
Dec 1, 2008
#11
  • Dec 1, 2008
  • #11
I'm with SVT...


My 1990 red coupe was a swap car. I bought it as a swap car for 3200 bucks. It had some mods too, HCI etc. I knew what to look for in the car, and saw the brakes were swapped etc. If you are at all knowledgeable with fox's you can look at a swapped car and point out all the things that were "hacked". All i did was paint and rims and i sold the car for over 6k.

My latest project is a swap too. I did the swapping. You can check out my progress thread, i did it using 100% ford parts the right way. Not saying i want to sell it, but someone who knows fox's will see that my car was swapped the right way. The engine is all stock too, only "mod" that was done was full exhaust
 

1993SSP

Founding Member
Sep 5, 2001
1,194
0
37
Ky
Dec 1, 2008
#12
  • Dec 1, 2008
  • #12
I am in the midst of doing a conversion, if it is done right with all the correct parts the car will be no different than a original V8 car. I have taken no shortcuts on anything, but alot of people will hit the major stuff and shortcut all the small items they can, those are the cars that are not worth buying.
 

1990Coupe

Founding Member
Mar 11, 2002
1,462
132
114
Toms River NJ
Dec 1, 2008
#13
  • Dec 1, 2008
  • #13
fanopj1 said:
i understand everyones negative opinion about the swap, but think about what the OP is saying. Nobody knows the mechanical ability or understandings of a person doing mods to their cars. How would one know if a H/C/I swap was done right, or a five lug conversion, or rear disc brake upgrade? How many rear end gears have been changed, and are they done correct? The same holds true for a V8 swap. Same concerns, right?
I still believe that a 4cyl to 8cyl swap, in my eyes, is no better or worse. Again, I know how much time a dedication to detail I put into mine, so I am alittle biased. Nothing was left in the 4 cyl, except the body. ALL harnesses, fuel and brake lines, K-member, rear end, every nut and bolt was gone through.
I would not walk away just because of the conversion. If the work was poorly done, being a swap or mods to a 5.0, than anyone would have second thoughts.
Click to expand...

nicely put
 

85_SS_302_Coupe

it sucks (I know) to be on the receiving end
15 Year Member
Nov 11, 2003
6,945
1,598
223
Northern KY
Dec 1, 2008
#14
  • Dec 1, 2008
  • #14
If done right, i think it can be better than a factory V8 car. At least with a 4 cylinder car you know it hasn't been beat very bad and the chassis has a lot less wear and flex on it than a V8 car would, especially the torque boxes. "Done right" is a huge part of it. The only major major downfall is for people who have to pass emissions and would look down on it because it's technically an illegal engine swap, even if you go with all the emissions crap.
 

SVT32VDOHC

waiting for the next hack atta
Founding Member
Nov 22, 2001
3,501
28
119
Motor City
Dec 1, 2008
#15
  • Dec 1, 2008
  • #15
Me and 1990Coupe did our swaps the same way. Clean, 4cyl car, got all the V8 parts from a donor car and made sure everything looked factory.

Two things though:

1. Make sure you do a 5 lug conversion. Everybody loves that.

2. Make sure the rear brakes are disc and not drum. Everyone who got excited over my 5 lug swap, was upset when I told them the rear was still drum.
 

1990Coupe

Founding Member
Mar 11, 2002
1,462
132
114
Toms River NJ
Dec 1, 2008
#16
  • Dec 1, 2008
  • #16
SVT32VDOHC said:
Me and 1990Coupe did our swaps the same way. Clean, 4cyl car, got all the V8 parts from a donor car and made sure everything looked factory.

Two things though:

1. Make sure you do a 5 lug conversion. Everybody loves that.

2. Make sure the rear brakes are disc and not drum. Everyone who got excited over my 5 lug swap, was upset when I told them the rear was still drum.
Click to expand...

+1


Only reason I ponied up the extra $$ for the rear disc was for "looks" and "ease of maintenance". I'd rather do brakes on a disc setup then a drum setup.
 

SVT32VDOHC

waiting for the next hack atta
Founding Member
Nov 22, 2001
3,501
28
119
Motor City
Dec 1, 2008
#17
  • Dec 1, 2008
  • #17
1990Coupe said:
+1


Only reason I ponied up the extra $$ for the rear disc was for "looks" and "ease of maintenance". I'd rather do brakes on a disc setup then a drum setup.
Click to expand...

I agree. They do look way better...especially with your wheels that show them off. My 97 Cobras hid the brakes, you couldn't tell what I had. Plus the stopping power is better.
 

fanopj1

New Member
Oct 17, 2006
17
0
0
Palm Coast, Florida
Dec 1, 2008
#18
  • Dec 1, 2008
  • #18
I am glad you guys ( 1990 copue, SVT, 1993SSP ) stepped up and agreed. A nicely done car, modded or swapped, done correctly, should not make a difference. I have watched your threads and see nicely, correctly done cars. I myself did not do a thread, but have done mine right over the last two years.
Again, in my eyes, it should not make a difference.
 
N

NewToFord

Member
Oct 7, 2008
318
1
19
CT
Dec 1, 2008
#19
  • Dec 1, 2008
  • #19
I am in the process of doing this swap. Everybody is going back to emissions. Isn't emissions all done through the sniffer on these cars? So its either gonna pass or its not, wether 4 cyl or 8. Its not obdII where they plug the car in.
 

1990Coupe

Founding Member
Mar 11, 2002
1,462
132
114
Toms River NJ
Dec 1, 2008
#20
  • Dec 1, 2008
  • #20
NewToFord said:
I am in the process of doing this swap. Everybody is going back to emissions. Isn't emissions all done through the sniffer on these cars? So its either gonna pass or its not, wether 4 cyl or 8. Its not obdII where they plug the car in.
Click to expand...

In NJ yes.

It doesn't make a difference if the car is 4 or 8. gotta pass the "sniffer".


fanopj1: Thanks for the props and i agree.. A swapped car, done right, should not make a difference. If the person knows fox mustangs at all, you can point out a hack no problem.
 
  • 1
  • 2
Next
1 of 2 Next Last
You must log in or register to reply here.

Similar threads

T
What's it Worth? 2002 GT conv/auto
  • tonydetesta
  • Jan 7, 2026
  • What is it Worth?!?!?
Replies
3
Views
593
What is it Worth?!?!? Jan 21, 2026
Mustang5L5
WTB/Trade Looking for a T-Top Hatch. Possible convertible trade? (Rhode Island)
  • 7upper
  • Mar 18, 2025
  • Fox Body Mustangs For Sale (1979-93)
Replies
0
Views
307
Fox Body Mustangs For Sale (1979-93) Mar 18, 2025
7upper
Progress Thread Akumu No Dara Ra's LSX swap and build Thread! Updated (2/10/22 @ 8:30PM CST)
  • Akumu No Dara Ra
  • Feb 4, 2022
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • 6 7 8
Replies
140
Views
15K
1996 - 2004 SN95 Mustang -General/Talk- Jun 17, 2022
Akumu No Dara Ra
Progress Thread Haven't posted in a looong time... rescuing another 'stang... '89 Vert
  • ChillPhatCat
  • May 20, 2019
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
21
Views
4K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Mar 1, 2023
joeballz83
J
Questionable Trade for 67- How crazy am I?
  • swooshdave
  • Aug 2, 2019
  • 1965 - 1973 Classic Mustangs -General/Talk-
  • 2 3
Replies
53
Views
8K
1965 - 1973 Classic Mustangs -General/Talk- Aug 29, 2019
Olivethefet
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?