• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech

410 gear reduce my 0-60 time???

  • Thread starter Thread starter robg860
  • Start date Start date Nov 25, 2005
Prev
  • 1
  • 2
First Prev 2 of 2

98blackmagic

New Member
Jun 2, 2005
386
0
0
wouldnt you like to know
Nov 27, 2005
#21
  • Nov 27, 2005
  • #21
97gtblue said:
yep exactly ive had 4.10's now i have 3.73's... i picked up about .2-.3 seconds at the 1/8 mile track around here
Click to expand...

What are your before and after numbers.
 
T

Too Slow

New Member
Jan 23, 2004
209
0
0
Houston, TX
Nov 27, 2005
#22
  • Nov 27, 2005
  • #22
98blackmagic said:
Awesome time I think that is really quick for a Auto car, in your sig you say you only have around 245hp at the wheels? Also on your 13.1 quarter run do you remember what your 1/8 was. I am very interested in your car because mine is a auto too and my new motor is going in at the end of next month and Im trying to get a idea of what other stangs are running (with autos) Your car is very impressive for such a small list of power makeing mods, your suspension is another story
Click to expand...

i have to ditto that. badass time. i have a 02 auto also and my current best is 13.4@101.8
 

98blackmagic

New Member
Jun 2, 2005
386
0
0
wouldnt you like to know
Nov 27, 2005
#23
  • Nov 27, 2005
  • #23
Too Slow said:
i have to ditto that. badass time. i have a 02 auto also and my current best is 13.4@101.8
Click to expand...

Hey your time isin't too shabby either, your both faster than me.....for now
 
T

Too Slow

New Member
Jan 23, 2004
209
0
0
Houston, TX
Nov 28, 2005
#24
  • Nov 28, 2005
  • #24
98blackmagic said:
Hey your time isin't too shabby either, your both faster than me.....for now
Click to expand...

lol yea i really want a stall converter like yall but i'm a little tight on money cause of college.
 
B

big T

New Member
Feb 25, 2004
265
0
0
Hawaii, oahu
Nov 28, 2005
#25
  • Nov 28, 2005
  • #25
Too Slow said:
i have to ditto that. badass time. i have a 02 auto also and my current best is 13.4@101.8
Click to expand...
Your time is sweet too. Can u post your mods please, thx.
 
B

big T

New Member
Feb 25, 2004
265
0
0
Hawaii, oahu
Nov 28, 2005
#26
  • Nov 28, 2005
  • #26
98blackmagic said:
Hey your time isin't too shabby either, your both faster than me.....for now
Click to expand...
Are u serious cause u have long tubes and cams over me and should be faster, Id think high 12's, unless u r at a high altitude or something.
 

tomustang

Psychotic Member
Founding Member
Jun 8, 2000
3,434
2
78
McLean Hospital
Nov 29, 2005
#27
  • Nov 29, 2005
  • #27
big T said:
Are u serious cause u have long tubes and cams over me and should be faster, Id think high 12's, unless u r at a high altitude or something.
Click to expand...
i dont see any tires for him, or a # for the 1/4...
 

98blackmagic

New Member
Jun 2, 2005
386
0
0
wouldnt you like to know
Nov 29, 2005
#28
  • Nov 29, 2005
  • #28
big T said:
Are u serious cause u have long tubes and cams over me and should be faster, Id think high 12's, unless u r at a high altitude or something.
Click to expand...


No you dont understand, I still have the non PI motor in my car right now , yes I have the bolt-on parts, but my heads are STOCK NON PI and my cams are STOCK NON PI. My new heads and cams are going on a fresh shortblock with forged pistons that will be installed in my car at the end of next month (december). That is why I said the other cars is quicker than mine now. I only have 235 at the wheels, with crappy street tires (no hook period) so my car isint running all that fast right now. Its enough to handle the ricers, however come next month when the new motor and BFG dragradials go on, were shooting for mid 12's all day long . Another stang with a setup similar to mine was tuned on the same dyno I go to in Jacksonville, and it put down 321 at the tires with a five speed:Word: . The only thing it had that mine dont is a bullitt intake, everything else the same cams, injectors, pistons, same guy even ported the heads (same stage 2) So were hopeing for around 300 at the tires with my aode trans. Then I would certainly hope my times would be quicker than you guys, and your 13.1 and 13.4 are great.
 

98blackmagic

New Member
Jun 2, 2005
386
0
0
wouldnt you like to know
Nov 29, 2005
#29
  • Nov 29, 2005
  • #29
tomustang said:
i dont see any tires for him, or a # for the 1/4...
Click to expand...


I havent run my car with my current mods, after the new motor is put in at the end of next month (December) I will get a couple quarter mile runs in and post my times. With any luck hopefully some mid 12's.
 
B

big T

New Member
Feb 25, 2004
265
0
0
Hawaii, oahu
Nov 29, 2005
#30
  • Nov 29, 2005
  • #30
98blackmagic said:
No you dont understand, I still have the non PI motor in my car right now , yes I have the bolt-on parts, but my heads are STOCK NON PI and my cams are STOCK NON PI. My new heads and cams are going on a fresh shortblock with forged pistons that will be installed in my car at the end of next month (december). That is why I said the other cars is quicker than mine now. I only have 235 at the wheels, with crappy street tires (no hook period) so my car isint running all that fast right now. Its enough to handle the ricers, however come next month when the new motor and BFG dragradials go on, were shooting for mid 12's all day long . Another stang with a setup similar to mine was tuned on the same dyno I go to in Jacksonville, and it put down 321 at the tires with a five speed:Word: . The only thing it had that mine dont is a bullitt intake, everything else the same cams, injectors, pistons, same guy even ported the heads (same stage 2) So were hopeing for around 300 at the tires with my aode trans. Then I would certainly hope my times would be quicker than you guys, and your 13.1 and 13.4 are great.
Click to expand...
Understood.
 

joshheat25

Member
Nov 8, 2004
871
0
16
Delaware
Nov 29, 2005
#31
  • Nov 29, 2005
  • #31
Yea Big T I have all the mds you have except an Stall converter and Welded subframes I am assuming that the stall would drop me down alot! Also does all of that suspension stuff you have help alot! What would help me the most in the 1/4 mile a stall! Yea my time is weak for my mph you are trapping 1mph faster but running .7 seconds faster!!!
 

98blackmagic

New Member
Jun 2, 2005
386
0
0
wouldnt you like to know
Nov 29, 2005
#32
  • Nov 29, 2005
  • #32
joshheat25 said:
Yea Big T I have all the mds you have except an Stall converter and Welded subframes I am assuming that the stall would drop me down alot! Also does all of that suspension stuff you have help alot! What would help me the most in the 1/4 mile a stall! Yea my time is weak for my mph you are trapping 1mph faster but running .7 seconds faster!!!
Click to expand...

I dont have any proof other than SOTP, but after my stall install I could feel a big change im my 98's attititude. I would guess the 4 to 6 tenths that was advertised with it is right. Its a good mod for a auto car with added hp, I would get one for sure if I was you, flat 13's or scratch the 12's for you
 
Prev
  • 1
  • 2
First Prev 2 of 2
You must log in or register to reply here.

Similar threads

J
Reduced power in 1st and 2nd gear
  • jimted79
  • Feb 25, 2025
  • SN95 4.6L Mustang Tech
Replies
5
Views
316
SN95 4.6L Mustang Tech Feb 25, 2025
Noobz347
B
Where to go from here on my build…
  • B0udreaux
  • Jul 14, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
8
Views
196
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 18, 2026
AeroCoupe
A
2001 Mustang GT, scorched metal smell and noise from trans/diff?
  • AndyE2255
  • Dec 1, 2025
  • SN95 4.6L Mustang Tech
Replies
4
Views
465
SN95 4.6L Mustang Tech Dec 28, 2025
gkomo
B
'03 GT Fuel Pump/Pressure/Delivery Issue
  • Brodach
  • Oct 21, 2025
  • SN95 4.6L Mustang Tech
Replies
8
Views
916
SN95 4.6L Mustang Tech Oct 31, 2025
gkomo
B
Questions About T5 Manual
  • Blackout67
  • Apr 13, 2025
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
10
Views
613
1996 - 2004 SN95 Mustang -General/Talk- Apr 22, 2025
89ripper
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?