I took my "official" 351windsor "Mexican" block down to the shop Monday. He looked it over and said it was a solid block and was the very first 351w Mexican he has ever seen or heard of (he's been doing engine work for 30+ years).
He's going to hot tank, magnaflux, new freeze plugs, new cam bearings, and bored .030, and notch the piston walls for a stroker.
Now, i'm not sure what size of a dish that I will need, but I do want the compression below 11:1, which can be done fairly easily. Someone that knows more than me (I don't know much) please chime in if you see something that could possibly be wrong. I've done a lot of research, and so far here is what i've decided upon.
Forged Crank with a 4.100" stroke.
Forged I-beam rods 6.200" long with 7/16" ARP bolts
Probe Forged dish top pistons
Total seal max moly ring set
Clevite H-Series main and rod bearings
That is what will be going on order here very soon if everything checks, and double checks out okay.
On the heads, i'm thinking about going with the AFR 225's or maybe the AFR205's with eh 58cc combustion chambers. I'm leaning toward the AFR225's as this car will be driven on the street weekends and select days only.
What do you think about this beast in the making?
He's going to hot tank, magnaflux, new freeze plugs, new cam bearings, and bored .030, and notch the piston walls for a stroker.
Now, i'm not sure what size of a dish that I will need, but I do want the compression below 11:1, which can be done fairly easily. Someone that knows more than me (I don't know much) please chime in if you see something that could possibly be wrong. I've done a lot of research, and so far here is what i've decided upon.
Forged Crank with a 4.100" stroke.
Forged I-beam rods 6.200" long with 7/16" ARP bolts
Probe Forged dish top pistons
Total seal max moly ring set
Clevite H-Series main and rod bearings
That is what will be going on order here very soon if everything checks, and double checks out okay.
On the heads, i'm thinking about going with the AFR 225's or maybe the AFR205's with eh 58cc combustion chambers. I'm leaning toward the AFR225's as this car will be driven on the street weekends and select days only.
What do you think about this beast in the making?