5.0 Coyote crate engine

KevinV

Member

Jan 9, 2001

64

4

8

Oct 23, 2010

#1

• Oct 23, 2010

• #1

Anyone considering putting a new 5.0 Coyote crate engine in place of their 4.6? The engine mounts and bell housing are the same. I don't know what else may prove problematic.

A supercharger can get you up in that 412+ HP range for about the same price, granted that it would be more costly to install a new engine. Which way would you prefer?

Thanks for any opinions.

 

klaw

Member

Oct 11, 2007

343

0

16

Calgary, Alberta, Canada

Oct 23, 2010

#2

• Oct 23, 2010

• #2

I'm going to give that engine a year or two to settle out. Let other guys do the research on where the limits are. The 4.6 combinations are pretty solid for whatever performance range you're looking at. Unless you enjoy being on the bleeding edge of development and money is no object I'd stay with your 4.6 and throw a little FI at it.

 

ct07gt

Member

Feb 14, 2008

377

0

16

Oct 23, 2010

#3

• Oct 23, 2010

• #3

There is no way the price would be comparable between the crate engine and a supercharger. The crate engine is $7k plus $1800 for the computer to run it, plus installation. The power steering in the 5.0 is electric as well, so you will have to get your steering to work as well. You would be better off keeping the 4.6 and getting a built bottom end for a blower. Or if you want a 5.0, trade your car in for one. Not trying to rain on your parade, but it is more involved to switch than it sounds.

 

3-0-II

Member

Oct 24, 2006

110

0

17

Redwood City, CA

Oct 23, 2010

#4

• Oct 23, 2010

• #4

i'd be down to swap aa 5.0 in place of my 4.6 *drools*

 

SpartaPerformance

10 Year Member

Nov 5, 2006

2,517

61

89

Long Island NY

Oct 23, 2010

#5

• Oct 23, 2010

• #5

ct07gt is 100% correct! 5.0L Crate engine I sell for example $6299.99, the wring harness sells for $1295.00 and the alternator kit is $225.99. Also you have to somehow rig your hydraulic power steering to work and LABOR!!!! whether you pay someone or take weeks to do it yourself it's a lot. Whipple H.O. kit is $6,699.99 and if you're worried about the bottom end then M-6009-A463V is $3,399.99 and if you buy from right place free shipping to 48 states. Labor would be cheaper and a hell of a lot less complicated.

 

bradleyem

Member

Apr 17, 2006

186

3

19

Columbus, Ohio

Oct 23, 2010

#6

• Oct 23, 2010

• #6

I'd rather just swap in an engine/transmission from a wrecked GT500. Near bulletproof 5.4L motor, 500HP (before throwing a smaller pulley on the S/C) and not having to pay for insurance on a GT500......

 

KevinV

Member

Jan 9, 2001

64

4

8

Oct 25, 2010

#7

• Oct 25, 2010

• #7

Thanks, that's why I asked. I don't (or didn't) know what complications there are. I expect there are probably more.

The only thing I'd add is I don't like the rear end of the new Mustang compared to my 08, so getting one of those is probably not something I'd do. Although I would tolerate it for a boss or a GT350.

 

DougNuts

Founding Member

Jul 11, 2000

2,596

0

47

Georgetown Ky

Oct 31, 2010

#8

• Oct 31, 2010

• #8

SpartaPerformance said:

ct07gt is 100% correct! 5.0L Crate engine I sell for example $6299.99, the wring harness sells for $1295.00 and the alternator kit is $225.99. Also you have to somehow rig your hydraulic power steering to work and LABOR!!!! whether you pay someone or take weeks to do it yourself it's a lot. Whipple H.O. kit is $6,699.99 and if you're worried about the bottom end then M-6009-A463V is $3,399.99 and if you buy from right place free shipping to 48 states. Labor would be cheaper and a hell of a lot less complicated.

Click to expand...

$7826 for the 5.0 vs. $10100 for the supercharged and built 4.6.

Just sayin'