5.0 ho cranks no start inj. has 12 volts on both wires???

V

vetfreak69

New Member

Jun 8, 2008

7

0

0

ky.

May 26, 2009

#1

• May 26, 2009

• #1

dont have noid light riged a 12 volt bulb no flash???????

 

HISSIN50

"How long does it take to get help in here?

15 Year Member

Nov 29, 1999

31,179

34

129

May 26, 2009

#2

• May 26, 2009

• #2

Use of proper tools helps.

The ground is modulated very quickly, which is why a noid light uses an LED type light (quick saturation and accurate dwell).

 

jrichker

StangNet's favorite TOOL

In Remembrance. Thank you for your contributions

Mar 10, 2000

27,512

2,813

234

Dublin GA

May 26, 2009

#3

• May 26, 2009

• #3

As HISSIN50 has said, use the right tool for the job.

The injector gets a square wave pulse which lasts for a very small fraction of a second. An incandescent lamp takes a few tenths of a second for the filament to heat to produce any light. That's why you aren't seeing any light.

 

Aliate X

Member

May 9, 2005

602

1

18

Rockland NY

May 26, 2009

#4

• May 26, 2009

• #4

JRICH I NEED YOU IN MY THREAD TOO! lol

 

B

bz393

New Member

Sep 24, 2006

29

0

2

maryland

May 26, 2009

#5

• May 26, 2009

• #5

Did you check the fuel pump??? Try and remove the schrader valve on the injector rail, turn to koeo and see if any fuel comes out.

 

HISSIN50

"How long does it take to get help in here?

15 Year Member

Nov 29, 1999

31,179

34

129

May 26, 2009

#6

• May 26, 2009

• #6

bz393 said:

Did you check the fuel pump??? Try and remove the schrader valve on the injector rail, turn to koeo and see if any fuel comes out.

Click to expand...

Use a fuel pressure gauge. Removing the Schrader valve opens the fuel system - this is a fire hazard and doesnt give any quantified information.