5.0 Ranger

Dont have camper anymore for that reason. Didnt want to get in an accident. To unstable. and didnt take it far from home because of that. Have RV now. But boy does it like gas LOL. I got better MPG with truck pulling camper than with RV pulling nothing LOL .
 
I kinda agree about the towing thing except any v8 f150 would tow a 23 foot trailer with no problem. The newer style 5.4's are rated at 8000-9000lbs. My Buddy tows a 26 foot trailer with his. I'll qualify that by saying he does it slowly.
 
A F cam in a 302 with gt40 or gt40p heads isnt good for a truck since your looking for low end tourqe and you tow stuff... Even the E cam is better then the F for your application , something like the recommended xe264 would serve you better then that F cam.
 
XE264? what is that? I dont realy tow anything beside my boat once in a blue moon. I use the Mark VII for that as the truck only seat two people and there is three of us.
I still want the lopy idle. So the F303 is not a good idea?
I have also heard that the rockers need to be shimed for replacement cams other than stock. This I did not do with the E303. Thinking I should now tho...
Will just doing this give me the little more power im looking for?
I have gotten mixed reviews on the cam choice.
Should I just leave the E303 in and shim the rockers and call it good for now untill i can get some good flowing heads? Thanks all
 
dyb003 said:
XE264? what is that? I dont realy tow anything beside my boat once in a blue moon. I use the Mark VII for that as the truck only seat two people and there is three of us.
I still want the lopy idle. So the F303 is not a good idea?
I have also heard that the rockers need to be shimed for replacement cams other than stock. This I did not do with the E303. Thinking I should now tho...
Will just doing this give me the little more power im looking for?
I have gotten mixed reviews on the cam choice.
Should I just leave the E303 in and shim the rockers and call it good for now untill i can get some good flowing heads? Thanks all

The secret to power in a smallblock Ford is in the heads and intake. The factory heads are horrendisly bad as delivered as is the intake. THey can be made better, but replacement is usually cheaper. The E303 is a good cam. I'd do good heads before changing the cam.
 
If someone is looking for an F-303 cam I have one. I got it on E-bay and now I decided to keep my E-303 for now, untill I change the heads. I will sell it for $110.00 ( that what I paid for it ) and will ship it free to the lower 48. I can take credit cards throu Pay Pal if that helps but cash is nice. I have a spec sheet I got off the web so you will not the dur ect....
 
Should I run a bigger carb? and what cam out there would give me a good loppy idle but be good low end power? I know I have to get a better set of heads but dont know what cam I should run. I figure I will get gt40 or thumper heads. What cam should I run? Thanks all.
 
Good choice on not puting the F cam in there. Not a good towing cam. If your wanting towing power I would either put in a stock HO cam or just leave the E cam in there as a nice comprimise. It still makes some power down low. And you should already have a lopey idle with the E cam. I have one in my 92 lx and it lopes just fine. I also had one in my 89GT and it had a nice lopey idle. Before I would go messing with cams though, I would drop those E6's in a dumpster and at least put some E7's on there. Puting in a bigger cam to make more power with those heads is kind of shooting yourself in the foot. If you just want a hot rod that sounds nasty, I say put in deep gears some decent heads and then you can use that F cam but dont try to tow anything with it :nice:

And a 600 or therebouts should be enough carb for that motor. Too much carb is bad too.
 
I never did shim the rockers after I put in the E303. Can this be a problem? It does have a lopy idle but not that much. I have to turn the idle way down to like 600rpm's or so to get it, but then it on the edge of stalling, like if I turn the wheel sometimes it will stall. If I turn it up to like 900 or so it doesnt lop that much. So is this because of not shimming the rockers for the E303? thank you
 
dyb003 said:
I never did shim the rockers after I put in the E303. Can this be a problem? It does have a lopy idle but not that much. I have to turn the idle way down to like 600rpm's or so to get it, but then it on the edge of stalling, like if I turn the wheel sometimes it will stall. If I turn it up to like 900 or so it doesnt lop that much. So is this because of not shimming the rockers for the E303? thank you

There's no connection between shimming and lope.

The problem you are running into is you are asking a camshaft to do 2 things at the same time that it can't do at the same time.

A camshaft with lope has timing events that don't support low end power production. Conversely a camshaft that produces low end power has timing events that do not allow it to have that lopeing sound.

Unfortunately you have to choose one or the other or compromise on both.
 
dyb003 said:
any thoughts on my last post? Thank you
I think you just need to find that "magic spot" where it will idle without stalling. When idle is up, lope will apear to go away. I personally don't think shim/no shim is an issue unless it just doesn't run right. Is it hitting on all cylinders, no matter what the idle is? Does it rattle? (ie rockers, lifter noise, etc..)
 
It runs just fine and on all cylinders. There is no rattleing noise. But what I dont know is that sence I didnt shim the rockers is it putting to much strees on the lifters or cam? There is a noise but its not a rattle or nocking, its more of just a rotateing noise that in more prominat after it worms up. It doesnt afect the way it runs, it just anoying. I took the belt off and its still there. Any thought on the noise?
 
dyb003 said:
It runs just fine and on all cylinders. There is no rattleing noise. But what I dont know is that sence I didnt shim the rockers is it putting to much strees on the lifters or cam? There is a noise but its not a rattle or nocking, its more of just a rotateing noise that in more prominat after it worms up. It doesnt afect the way it runs, it just anoying. I took the belt off and its still there. Any thought on the noise?

Roller rockers and roller cams have a normal kinda of whiring, quiet ticking sound.
 
But my Lincoln Mark VII doesnt make that noise and its the same engine, just took off the FI. That is a good example of the sound, a whirling noise. Its not even close to sounding like those noisey cam gears. Its almost like a tiny whirling noise. It not roller rockers just roller lifters. This noise is driving me crazy and I dont want to rip the engine apart and find nothing, Would like an idea of where to look. I know it hard to figure out a noise with out hearing but if someone has had the noise before it might help me in fixing it. Thanks all