ive asked about rebuilding my stock block but let me ask you guys this. If i get a new block and build it up for say 500+ hp what is a good block to go with? I even have a 73 302 truck block laying around would it hold up or do i just need to get a after market block. What kind if you say after market, would like a 347 stroker too. Thanks guys
5.0 rebuild
- Thread starter mudmansfury
- Start date
-
Sponsors (?)
blackened88lx
Active Member
This belongs in Tech.
I'm not sure about the truck block, but if you're ready to spend the money on an aftermarket block, it would be a good idea to go with a Dart, or the new Ford Boss 302 block which looks like it's going to be great, and rather affordable. You will spend $2k on a Dart, plus machining. The Boss will probably be around $1500 plus maching. If you don't plan on going much over 500rwhp, you could find a used Ford Sportsman block for cheap, but that won't handle nearly as much as the others I listed.
I'm not sure about the truck block, but if you're ready to spend the money on an aftermarket block, it would be a good idea to go with a Dart, or the new Ford Boss 302 block which looks like it's going to be great, and rather affordable. You will spend $2k on a Dart, plus machining. The Boss will probably be around $1500 plus maching. If you don't plan on going much over 500rwhp, you could find a used Ford Sportsman block for cheap, but that won't handle nearly as much as the others I listed.
