I have the chance to buy spindles, calipers, wheel bearings for my car to do a 5 lug setup....but the parts are from a 2000 Mustang. will this all work the same as any other 94-98 setup. The calipers are aluminum he says so that would be a bonus
everything ive seen says the 99+ spindles are the same as the 96-98's. id do the deal just for the calipers if theyre in good shape, probably the best brake setup for a junkyard 5-lug swap that can still fit a 15" drag wheel.
1996-2004 all use the same spindle. It's slightly wider than the 1994-1995 version and both are slightly wider than a Fox spindle.
The 96+ units offer better suspension geometry and bumpsteer.
The calipers are twin-piston PBR calipers with dual 44.5mm pistons and a 10.8" rotor. About the best performance you will get without going to a 13" cobra rotor.
or a spacer on the threads, the only real difference between the fox and sn balljoints is the length of thread on the stud, as the fox spindle castings are thicker in that area.