Rebuilt my control valve (thanks to stangerssite.com! Great kit. ) and still have the 6 cyl linkage. This is the centerlink that has the seperate bracket bolted to it that holds the control valve. The control valve sleeve threads onto this short bracket.
Need the spec from the shop manual for the measurement that determines how far to screw the sleeve onto the bracket, and what two points are measured. If anyone can come up with that I would greatly appreciate it. (and I could get this back together...!)
Need the spec from the shop manual for the measurement that determines how far to screw the sleeve onto the bracket, and what two points are measured. If anyone can come up with that I would greatly appreciate it. (and I could get this back together...!)