84 Foxbody Single Turbo Opinions

Welcome ! Since you jumped right in..... I'll get right to the chase.... I'm in the process of building a studded and girdled 331 stroker turbo. The best advcice I can give you is to build a 351 based motor...can be stroked and good for 750hp. The 393 stroker is one of the cheapest to build. The reason I'm saying this is because a stock 5.0 block can only handle so much. They usually meet their demise around 500hp. Even with a girdle and studs, the block is only good for so much. A Dart block would be even better. I started my process a few years ago and have too much tied up in my motor. Wish I would've known what I know now. There are some stock motors running around that are holding up well under boost, just remember that boost multiplies off of whatever mods are done. 7psi to some may be 380hp....7psi to others may be 512hp.

My advice would be to skip the blow through carb we tried this on a few of our race cars it does not turn out well inevitably the seals in the carb will start to leak. I would switch it over to EFI when you add the turbo this can be done very cheaply and simply. There are quite a few of us on here that run boosted setups just remember that turbos come with Jack Stands I myself build a custom M90 supercharger set up for mine it all really depends on your budget and how far you want to take the project the above is true the stock 302 block usually gives up around 500 horsepower torque a 351 based engine would be far more robust