Hi all, I'm trying to upgrade my front brakes on 85 mustangs GT 10" rotor set to a 86 GT 11" rotor set up 4 lug. I swapped over front spindles and calipers complete and had to put washers in the holes for the strut /spindle mounting about 1/4 space. Had to also drill strut bolt holes to next size up. Everything is in the car without any major modifications but alignment looks way off on the toe measurements. I have pony wheels on as well. Is this normal or can it not be done. Is there enough room to adjust the tie rods or do I need anything else.
Thanks for any advice or help
Thanks for any advice or help