• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

86 and 89 to 93 map sensor

  • Thread starter Thread starter noslow1986
  • Start date Start date Apr 16, 2007
N

noslow1986

New Member
Mar 25, 2006
274
0
0
oswego Il
Apr 16, 2007
#1
  • Apr 16, 2007
  • #1
is there any difference in 86 and 90 map sensors inside. now i know u can cap off the vacuum line but i was thinking maybe there is a difference on the inside between the two. i switch to mass air and runs crappy when i cap off the vacuum line. auto zone says they are the same but i dont trust them
 

Fett

New Member
Nov 2, 2004
766
6
0
Apr 16, 2007
#2
  • Apr 16, 2007
  • #2
Ford says they are different. Not sure what the difference really is, or if you can swap them with one another....but Ford has different part numbers for the two.
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Apr 17, 2007
#3
  • Apr 17, 2007
  • #3
noslow1986 said:
i switch to mass air and runs crappy when i cap off the vacuum line.
Click to expand...

If you switched to mass air, you would not want to cap off the sensor's port anyhow, right?

Good luck.
 

4G-KDMP

10 Year Member
Jul 23, 2005
935
19
39
CA
Apr 17, 2007
#4
  • Apr 17, 2007
  • #4
map and bap sensors are the exact same part, the only difference is whether the port is attached to vacuum line or left open to atmosphere from everything i've read.
 
N

noslow1986

New Member
Mar 25, 2006
274
0
0
oswego Il
Apr 17, 2007
#5
  • Apr 17, 2007
  • #5
so u cap off the vacuum line and leave the port open on the map sensor
 

4G-KDMP

10 Year Member
Jul 23, 2005
935
19
39
CA
Apr 17, 2007
#6
  • Apr 17, 2007
  • #6
that's how i read it on 2 different sites i go to.
 
You must log in or register to reply here.

Similar threads

Resolved 93 Mustang 5.0 - Cranks but does not start
  • dan50
  • Jul 18, 2026
  • Fox 5.0 Mustang Tech
Replies
6
Views
493
Fox 5.0 Mustang Tech Jul 18, 2026
dan50
S
Fuel ‘88 GT Runs Rich Cold — Fixes Itself When I Unplug Sensors (ECT, MAF, O2, etc.)
  • Sufarry
  • Nov 6, 2025
  • Fox 5.0 Mustang Tech
Replies
12
Views
1K
Fox 5.0 Mustang Tech Nov 9, 2025
Mustang5L5
Engine Popping noise in the intake. Frustrated still.
  • esteban31065
  • Apr 6, 2025
  • Fox 5.0 Mustang Tech
Replies
15
Views
1K
Fox 5.0 Mustang Tech May 23, 2025
gkomo
SOLD Microsquirt, new wideband gauge, EEC4 connector, GM type MAP sensor and cables. Should work on any EEC4 powered vehicle. 86-93 Mustang.
  • reddy351
  • Nov 1, 2024
  • Engine and Power Adder
Replies
0
Views
286
Engine and Power Adder Nov 1, 2024
reddy351
G
2006 Mustang GT o2 Sensor Wiring Issue Car Bogging/Choking
  • GCantero93
  • Sep 5, 2025
  • 2005 - 2009 Specific Tech
Replies
4
Views
1K
2005 - 2009 Specific Tech Sep 6, 2025
Noobz347
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?