T TokyoJoe New Member Mar 25, 2007 179 5 0 Oct 5, 2007 #1 Oct 5, 2007 #1 I am going to be doing a rear disc conversion on the fox and I would like to know how to identify a fox body cylinder and a 94+ cylinder. The previous owner may have changed it and I don't want to have to re-do something if I don't have to. Thanks
I am going to be doing a rear disc conversion on the fox and I would like to know how to identify a fox body cylinder and a 94+ cylinder. The previous owner may have changed it and I don't want to have to re-do something if I don't have to. Thanks
jrichker StangNet's favorite TOOL In Remembrance. Thank you for your contributions Mar 10, 2000 27,512 2,813 234 Dublin GA Oct 5, 2007 #2 Oct 5, 2007 #2 The 94 -95 units have 2 ports, while the 87-93 5.0's had a 3 port M/C. See http://www.svo73mm.cjb.net/ for Mustang brake upgrades. This is a can't miss checking it out site if you are doing brake upgrades.
The 94 -95 units have 2 ports, while the 87-93 5.0's had a 3 port M/C. See http://www.svo73mm.cjb.net/ for Mustang brake upgrades. This is a can't miss checking it out site if you are doing brake upgrades.