87 HOOD Help, Leaving for paint in less then a month!

Hey Guys, I am a new Member looking for some opinions. First off I want to give the respects. You guys have helped me(countless hours of researching and brain draining and reading, and reading as a viewer only) build my fox and make it mine. I've used this site for the AOD to T5, MAF upgrade with the 89 harness and re-pining all wires into factory locations on the harness(Nice and sexy). Changed the floors, quarters, rockers. Changed the Oil pan gasket in car(And YES, It will come out , Of course the ol' 41&91, 44&94 usual stuff. This is my 8th Mustang. And this will be the one I die with. I now know this Car better then my own body.

Anyways...

She's leaving for paint on Dec 5th after 3 Years of making her perfect. I have less then a month to get her together for my Body Guy. I just grabbed all the new Door trim, Body Kit Mounts, Metal Door Handles etc. So I think I have everything, But then I remember the motor i'm going to order. I'm grabbing the FRPP 392 Crate, just going to jump the usual bolt ons and stuff. I am going to switch the Z304's in the crate to some AFRs I think later on.

But the problem is I'm running a stock hood right now. And I know the 392 or even a 351 for that matter is going to not like squeezing in there. So I need a Cowl.

I know the usual Cervini's 2.5 will work and look good. But then I seen a 2" Steel Cowl Hood at LRS and I think the same one at the Mustang Shop in Alberta, But no manufacturer, so I called(Mustang Shop) and they said it's a GoldenStar I think? Haven't found any reviews or read a single forum about this steel hood.

I like Steel, Sounds and looks great. And it's about 50-100 bucks cheaper then the cervini's 2.5" Fiberglass cowl with shipping included.

Has anyone ever used this hood? Or Heard of it?

1987-93 Mustang 2" Steel Cowl Hood at LRS - Same Day Shipping!

Or

1987/93 Steel Cowl Hood

Any info would be great! And thanks again for such a great forum

The Problem is I don't have many Canadian Dealers for Glass or Metal Hoods. Unless someone knows a place??

a lot of US places won't ship over the border.. Probably looked at as a massive headache and liability. Which I understand.

Steeda is far to expensive but close to me I can pick it up (Can get the same hood shipped to my door cheaper from Mustang Shop)

Wish I knew of a good Harwood, Cervini, Maybe HO Fiber in the area or within reasonable shipping.