89 mustang push button start switch

[jreed2]

on my 89 project car i bought one of the previous owners mounted a push button switch in the ash tray with two wires running out to the solenoid and that is the only way it will start. I am trying to figure out how to get it back to stock with key start i disconnected the wires and tried the key and i got nothing i did replace the lock cylinder because the second day i had the car it locked up in the off position and i had to drill the tumblers out to replace it. Thanks for the help guys.

 

[stang&2Birds]

Thanks to TMOSS, there are many wiring/etc diagrams for the Fox here:
Mustang FAQ - Wiring & Engine Info

 

[jrichker]

Typical start circuit...
Diagram courtesy of Tmoss & Stang&2birds

Diagram courtesy of Tmoss & Stang&2birds

See the following website for some help from Tmoss (diagram designer) & Stang&2Birds (website host) for help on 88-95 wiring Mustang FAQ - Wiring & Engine Info Everyone should bookmark this site.

Ignition switch wiring
http://www.veryuseful.com/mustang/tech/engine/images/IgnitionSwitchWiring.gif

Fuel, alternator, A/C and ignition wiring
http://www.veryuseful.com/mustang/tech/engine/images/fuel-alt-links-ign-ac.gif

Complete computer, actuator & sensor wiring diagram for 88-91 Mass Air Mustangs
http://www.veryuseful.com/mustang/tech/engine/images/88-91_5.0_EEC_Wiring_Diagram.gif

Complete computer, actuator & sensor wiring diagram for 91-93 Mass Air Mustangs
http://www.veryuseful.com/mustang/tech/engine/images/91-93_5.0_EEC_Wiring_Diagram.gif

Vacuum diagram 89-93 Mustangs
http://www.veryuseful.com/mustang/tech/engine/images/mustangFoxFordVacuumDiagram.jpg

HVAC vacuum diagram
http://www.veryuseful.com/mustang/tech/engine/images/Mustang_AC_heat_vacuum_controls.gif

TFI module differences & pinout
http://www.veryuseful.com/mustang/tech/engine/images/TFI_5.0_comparison.gif

Fuse box layout
http://www.veryuseful.com/mustang/tech/engine/images/MustangFuseBox.gif