Suspension 90 convertible cross brace rivet loose.

91GTstroked · Jul 21, 2023

Hi everyone,

This is my first convertible, I've been trying to track down a front end clunk noise that gets really loud over bumps.

I haven't narrowed it down to this, but it's definitely loud if I push up on the tubular bar that attaches to this area where the rivet's are.

Can I replace this rivet? Is there a better option?

Thank you

AeroCoupe · Jul 21, 2023

All day long. Not sure what the size is but it could be one of those 1/4” ones like on the windows. Hopefully it’s a 3/16” or smaller and a standard River gun will work.

I got a rivet gun from Harbor Freight that does 1/4” and it’s run off an air compressor.

91GTstroked · Jul 21, 2023

AeroCoupe said:
All day long. Not sure what the size is but it could be one of those 1/4” ones like on the windows. Hopefully it’s a 3/16” or smaller and a standard River gun will work.

I got a rivet gun from Harbor Freight that does 1/4” and it’s run off an air compressor.

I don't have a rivet gun so I'll have to buy one. I just drill out the old one correct?

AeroCoupe · Jul 21, 2023

Correct. Typically you can use a drill bit that is larger than the hole and just drill the head off the rivet. Once that is down you use a punch and hammer to remove the body of the rivet.

limp · Jul 22, 2023

AeroCoupe said:
Correct. Typically you can use a drill bit that is larger than the hole and just drill the head off the rivet. Once that is down you use a punch and hammer to remove the body of the rivet.

I have found if you have the right size punch, its easier to hammer out the pin, then drill the head off....
How well does that air powered rivet gun work? TY

AeroCoupe · Jul 22, 2023

Works really well. One of my friends races sprint cars and he bought one to put all the body panels on the chassis and to make repairs on the wings. He said it worked good and that sold me. I’ve only used it on the big 1/4” rivets like the door glass but so far it works well.

Harbor Freight Tools – Quality Tools at Discount Prices Since 1977

Harbor Freight buys their top quality tools from the same factories that supply our competitors. We cut out the middleman and pass the savings to you!

www.harborfreight.com

limp · Jul 22, 2023

AeroCoupe said:
Works really well. One of my friends races sprint cars and he bought one to put all the body panels on the chassis and to make repairs on the wings. He said it worked good and that sold me. I’ve only used it on the big 1/4” rivets like the door glass but so far it works well.

Harbor Freight Tools – Quality Tools at Discount Prices Since 1977

Harbor Freight buys their top quality tools from the same factories that supply our competitors. We cut out the middleman and pass the savings to you!

www.harborfreight.com

TY for the response... The reviews had alot of " old men" saying their loss of hand strength made purchasing this a necessity... I think I fit that description... LOL

Suspension 90 convertible cross brace rivet loose.

91GTstroked

Attachments

AeroCoupe

lube between the nut and the face. I know my lubes

91GTstroked

AeroCoupe

lube between the nut and the face. I know my lubes

limp

wrap a little cheese around it and its a done

AeroCoupe

lube between the nut and the face. I know my lubes

Harbor Freight Tools – Quality Tools at Discount Prices Since 1977

limp

wrap a little cheese around it and its a done

Harbor Freight Tools – Quality Tools at Discount Prices Since 1977

Similar threads

Suspension 90 convertible cross brace rivet loose.

Attachments

lube between the nut and the face. I know my lubes

lube between the nut and the face. I know my lubes

wrap a little cheese around it and its a done

lube between the nut and the face. I know my lubes

wrap a little cheese around it and its a done

Similar threads

Privacy & Transparency

Privacy & Transparency