So it's been forever since my car got any attention, however I'm finally finding the time and motivation to finish it up. I had a fuel rail fitment issue which made it necessary to remove the lower and of course I marked nothing. I'm now at the point where it's time to drop the distributor back in and just would like some verification I'm in the right place so I can cross timing off the list if I have any problems starting the car.
Timing was set by turning the motor until air came out and continuing to turn the crank to 0 on the pointer. Both valves for cylinder one appear closed which should verify I'm on the compression stroke. Can anyone have a look at the pictures and verify for me? Thanks, and it's good to be back!
Timing was set by turning the motor until air came out and continuing to turn the crank to 0 on the pointer. Both valves for cylinder one appear closed which should verify I'm on the compression stroke. Can anyone have a look at the pictures and verify for me? Thanks, and it's good to be back!