92 won't crank

M

maybenot56789

New Member

Mar 11, 2006

16

0

2

May 4, 2008

#1

• May 4, 2008

• #1

Hi guys,
i have a 92, 2.3, 8 plug automatic. Car ran fine after i just registered it. Today go to start and nothing. i tried starting in neutral, jiggling the shifter in park, jumping it-no start. the battery shows 12V on a meter and needle is on R on the guage, the fuel pump makes a noise when i turn the key, the door alert dings(when open) and the normal guage lights are lit while turning the key but thats all-no crank.
i am used to non sensor/computer engines, where do i start? Thanks in advance.
johnny

 

R

RustBucket

New Member

Jun 8, 2003

585

0

0

Buford, GA

May 5, 2008

#2

• May 5, 2008

• #2

maybenot56789 said:

i am used to non sensor/computer engines, where do i start? Thanks in advance.
johnny

Click to expand...

Same place you'd start on a non sensor/computer car. Check grounds, starter solenoid, ignition switch, starter and all the wiring in between.

 

BlackBird

Founding Member

Sep 16, 2001

156

0

0

London, Ont

May 5, 2008

#3

• May 5, 2008

• #3

Do you hear the starter solenoid clicking? If you do, then the problem is likely somewhere between the solenoid and the starter, including possibly being the solenoid. If you don't hear the solenoid clicking, then you need to check your neutral safety switch, ignition switch and the solenoid.

 

M

maybenot56789

New Member

Mar 11, 2006

16

0

2

May 5, 2008

#4

• May 5, 2008

• #4

i'm pretty sure the neutral switch works, i hear the clicking in park and neutral but not in D. Can you "jump" the solenoid in these cars and not worry about frying something or setting off the air bag?

 

BlackBird

Founding Member

Sep 16, 2001

156

0

0

London, Ont

May 5, 2008

#5

• May 5, 2008

• #5

Setting off the airbag by jumping the starter solenoid? That's a new one on me. There's no reason you can't jump the terminals at the solenoid, but if the starter is the same as my '93, all the fender mounted solenoid just triggers the starter-mounded solenoid. But you can at least eliminate it as a problem.

 

M

maybenot56789

New Member

Mar 11, 2006

16

0

2

May 5, 2008

#6

• May 5, 2008

• #6

Thanks,
i just am used to much older cars, i'm just being cautious overly i guess, like i said before i never had a car with sensors and such, i will test after work tonight.

 

M

maybenot56789

New Member

Mar 11, 2006

16

0

2

May 6, 2008

#7

• May 6, 2008

• #7

thanks for all your help folks,
i had power going to the starter, so i replaced it.(probably the original anyway) and she started right up. Thanks again.

 

BlackBird

Founding Member

Sep 16, 2001

156

0

0

London, Ont

May 6, 2008

#8

• May 6, 2008

• #8

Glad to see you got it sorted out!

 

stykthyn

I want to measure mine. It doesn't look that tall.

15 Year Member

Jul 6, 2006

5,232

2,652

223

gainesville

May 7, 2008

#9

• May 7, 2008

• #9

this happened to me a couple months ago. was real frustrating. glad you got it figured out.