I am not a 5.0 guy so I need your help. I just got a 93 Cobra from my father-in-law. It had a BBK intake and TB installed a few weeks ago (before I got the car). The car was not running very good when I got it so I put new plugs, wires, and cap on the car. I also found a vac hose that was broken so I repaired it as well. The car is running better but had a high idle. I lowered the idle and it is now running fine.
The issue I am having with the car is that if you go WOT the car just lays down and feels like it has no power. If I get into it slowly, the car will pull very well. As soon as I get on it, it just stops pulling. Is there something that needs to be done to the car to make it run right with the intake or TB. I asked my father-in-law if it was having this issue before the intake and Tb and he said "NO."
Any Ideas???
The issue I am having with the car is that if you go WOT the car just lays down and feels like it has no power. If I get into it slowly, the car will pull very well. As soon as I get on it, it just stops pulling. Is there something that needs to be done to the car to make it run right with the intake or TB. I asked my father-in-law if it was having this issue before the intake and Tb and he said "NO."
Any Ideas???