94-95 Cobra Intake, Installation Hardware Needed?

Swarzkopf

Member

Sep 23, 2004

973

0

16

Pittsburgh

Aug 16, 2005

#1

• Aug 16, 2005

• #1

I just picked up a used 94-95 Cobra intake manifold. It came with no hardware.

I've been searching here for the past hour and cannot find definitive answers.

Can anyone list for me the following information:

Gaskets needed for upper and lower (part numbers please)
Bolt sizes for upper and lower (or bolt kit, if there is one)
Any other specific hardware I'll need (part numbers much appreciated. ).

I'd really appreciate it.

 

W

wytstang

Mustang Master

Mar 14, 2004

4,988

4

78

Summerville,SC missing South Fl. weather :(

Aug 16, 2005

#2

• Aug 16, 2005

• #2

Don't have part #'s but here what you'll need.
1.Gasket paper-I couldn't find a TB gasket local no one got the right one (all to big)
2.EGR-reused old one again could not find one old the fox
3. Just ask for cobra intake gasket set for a 95 (fel-pro)
4.Bolts-Two(2) 5.5 inch bolts, Two(2) 6.0 inch bolts, Two(2) 2.0 inch bolts,
Twelve(12) washers for bolts-according to-http://www.corral.net/forums/showthread.php?t=588357
Or fordracing.com sells the bolt kit
5. New T-stat w/gasket
6. Coolant
*Note* Mark the dizzy/block/rotor location before removing. That way you can just stabb the dizzy back in and fire it right up. To make life easier buy a large S wrench made to remove/tighten the hold down bolt for the dizzy.

 

Swarzkopf

Member

Sep 23, 2004

973

0

16

Pittsburgh

Aug 16, 2005

#3

• Aug 16, 2005

• #3

Thanks wytstang, I appreciate the help.

Does anyone know the part numbers for the Cobra lower manifold to cylinder head gasket?

 

Swarzkopf

Member

Sep 23, 2004

973

0

16

Pittsburgh

Aug 16, 2005

#4

• Aug 16, 2005

• #4

Also, does anyone know the lower manifold bolt sizes?

 

W

wytstang

Mustang Master

Mar 14, 2004

4,988

4

78

Summerville,SC missing South Fl. weather :(

Aug 16, 2005

#5

• Aug 16, 2005

• #5

Lower intake reuses the stock bolts, I'm pretty sure the lower gaskets are fel pro 1250

 

Swarzkopf

Member

Sep 23, 2004

973

0

16

Pittsburgh

Aug 16, 2005

#6

• Aug 16, 2005

• #6

Awesome! Thanks a ton wytstang. I'll probably just use some home depot bolts as mounting studs then.

 

DarkProphet

Founding Member

Aug 19, 2002

391

0

0

Quakertown, PA

Aug 16, 2005

#7

• Aug 16, 2005

• #7

Is it the same hardware as the gt40 upper?

 

W

wytstang

Mustang Master

Mar 14, 2004

4,988

4

78

Summerville,SC missing South Fl. weather :(

Aug 17, 2005

#8

• Aug 17, 2005

• #8

DP-Yep say hardware..

 

RIO5.0

15 Year Member

Feb 16, 2001

6,892

8

128

N.H.

Aug 17, 2005

#9

• Aug 17, 2005

• #9

If you still have stock heads then The Fel-Pro MS93334 will do fine for the lower...the upper/lower is MS95953..

If I remember right the GT40 bolt kit is like 10.00 and you get the entire set...

 

DarkProphet

Founding Member

Aug 19, 2002

391

0

0

Quakertown, PA

Aug 18, 2005

#10

• Aug 18, 2005

• #10

I ran into a problem today. The GT40 bolt kit has a 30 day wait on it due to my dealer being slow, so thats out of the question. I went to my local bolt supply shop (G&S Fastners) and they dont have the 5/16" bolt in 7". What should I do? does anyone know what size the bolts are for the stock gt manifold?

 

RIO5.0

15 Year Member

Feb 16, 2001

6,892

8

128

N.H.

Aug 18, 2005

#11

• Aug 18, 2005

• #11

Head to Home Depot or even a local hardware store and get a lenght of Redi-Rod...it come in 3' lenghts...cut the lenghts you need and use nuts to get you buy...
I have a dozen or more intake bolts, including a new GT40 kit I never used, some from an Explorer and my 93 Cobra...If your in a jam give me a shout...

 

SaltWaterFish

Founding Member

Jan 6, 2002

208

0

17

Cedar Rapids, IA

Aug 18, 2005

#12

• Aug 18, 2005

• #12

There are the part numbers I have collected for my cobra install.

These are all Fel-Pro numbers.

95953 upper to lower
60859 TB
70020 EGR (Fox p/n but it will work)

Have not had time to get the others yet.

 

Swarzkopf

Member

Sep 23, 2004

973

0

16

Pittsburgh

Aug 19, 2005

#13

• Aug 19, 2005

• #13

Thanks guys...I just ordered the following from Summit:

---
ASP-025030 Bracket, Smog Pump Eliminator, Aluminum, Natural, Ford, Mustang, 5.0L, Kit $65.95 1 $65.95


FEL-MS93334 Intake Gaskets, Stock Port, Ford, EFI, 5.0L, Set $15.69 1 $15.69


FEL-MS95953 UPPER SET INTAKE COBRA/GT40 $9.99 1 $9.99


FMS-M-6002-A50 GT40 MANIFOLD BOLT KIT $6.88 1 $6.88

---

 

D

DavidNC

Founding Member

Sep 16, 2002

119

2

16

Aug 24, 2005

#14

• Aug 24, 2005

• #14

I'm looking for a bolt kit for the explorer intake. Canyou give me the measurments and qty's of each bolt that came with your boltst kit. I do have two of the long bolts, but the rest are missing.

Thanks,
David

Swarzkopf said:

Thanks guys...I just ordered the following from Summit:

---
ASP-025030 Bracket, Smog Pump Eliminator, Aluminum, Natural, Ford, Mustang, 5.0L, Kit $65.95 1 $65.95


FEL-MS93334 Intake Gaskets, Stock Port, Ford, EFI, 5.0L, Set $15.69 1 $15.69


FEL-MS95953 UPPER SET INTAKE COBRA/GT40 $9.99 1 $9.99


FMS-M-6002-A50 GT40 MANIFOLD BOLT KIT $6.88 1 $6.88

---

Click to expand...

 

D

DavidNC

Founding Member

Sep 16, 2002

119

2

16

Aug 24, 2005

#15

• Aug 24, 2005

• #15

I'm looking for a bolt kit for the explorer intake. Canyou give me the measurments and qty's of each bolt that came with your boltst kit. I do have two of the long bolts, but the rest are missing.

Thanks,
David

Swarzkopf said:

Thanks guys...I just ordered the following from Summit:

---
ASP-025030 Bracket, Smog Pump Eliminator, Aluminum, Natural, Ford, Mustang, 5.0L, Kit $65.95 1 $65.95


FEL-MS93334 Intake Gaskets, Stock Port, Ford, EFI, 5.0L, Set $15.69 1 $15.69


FEL-MS95953 UPPER SET INTAKE COBRA/GT40 $9.99 1 $9.99


FMS-M-6002-A50 GT40 MANIFOLD BOLT KIT $6.88 1 $6.88

---

Click to expand...