so... To get started I bought a 94 5.0 cobra for a great price and started to do quite a few different things to it. Most recently is change the spark plugs wires cap and rotor. While changing the plugs I cracked a new one and had to replace it again. Ever since I've done the job I get a misfire once in awhile. Cold starts and just sitting at the light. So at work(I'm a mechanic) I took everything back apart. Plugs don't look cracked anywhere. In the process I destroyed a new wire. Instead of taking chances I bought another wire kit. Still misses. Originally had platinum sand I switch to oem motorcraft. After more aimless wondering I figured I can just put new platnuims in. Bought them and gonna do it tomorrow. Was thinking about hooking to scanner to it. Just wondering if there is a misfire monitor that can point a direction on the scanner to which cylinder it is? Any help will help!!! Thanks. By the way. Hi!!!! Hahahah