Looking to buy a custom cam for my AFR 165 setup. One is for sale in the classified section, but it was for a 94 GT. Wanted to know if this will work in my 91. Computer should be the only difference correct? Seller stated that prior to the grind, he told Ed not to worry about tuning it for the 94 computer, as he was going to self tune with a TwEECer. Thanks in advance for the advice.
P.S. Engine combo is very similar
Specs from classified ad:
Gross valve lift 1.6 ratio - 0.5456 intake
Gross valve lift 1.6 ratio - 0.5552 exhaust
Duration @ 0.006" tappet lift - 280° intake
Duration @ 0.006" tappet lift - 274° exhaust
Duration @ 0.050" tappet lift - 224° intake
Duration @ 0.050" tappet lift - 224° exhaust
Lobe seperation - 112°
P.S. Engine combo is very similar
Specs from classified ad:
Gross valve lift 1.6 ratio - 0.5456 intake
Gross valve lift 1.6 ratio - 0.5552 exhaust
Duration @ 0.006" tappet lift - 280° intake
Duration @ 0.006" tappet lift - 274° exhaust
Duration @ 0.050" tappet lift - 224° intake
Duration @ 0.050" tappet lift - 224° exhaust
Lobe seperation - 112°