• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech

94 GT with Exhaust Leak

  • Thread starter Thread starter caf6916
  • Start date Start date Jan 9, 2006

caf6916

New Member
Nov 27, 2004
12
0
0
Jan 9, 2006
#1
  • Jan 9, 2006
  • #1
About 1 month ago, after the weather got kinda cold, I started hearing an exhaust leak on the driver's side. I opened up the rocker cover only to find the top side of the head looked fine. I have repositioned and tightened the H-Pipe to see if it was leaking there, and no luck. I did not notice (not that I could see very well) any gaps in the gasket. I have BBK headers that are about 6 years old. I have ordered an new set of gaskets and will replace this weekend to see if that resolves it. I have noticed that the leak tends to sound louder, the colder the engine.

Am I on the right path here???
 

v6v8swap

Member
Mar 20, 2004
113
0
16
Oklahoma
Jan 9, 2006
#2
  • Jan 9, 2006
  • #2
That's what I would do. The gasket may have blown out and have just a small hole that partially seals up when the engine warms up. Good luck!
Phil
 

S/CBlack95GT

New Member
Apr 6, 2003
2,018
0
0
Tampa Palms, FL
Jan 9, 2006
#3
  • Jan 9, 2006
  • #3
Probably those cheap BBK headers. I know mine didnt last long.
 

caf6916

New Member
Nov 27, 2004
12
0
0
Jan 9, 2006
#4
  • Jan 9, 2006
  • #4
S/CBlack95GT said:
Probably those cheap BBK headers. I know mine didnt last long.
Click to expand...


Really? How did they fail? Holes, warping, cracking??
 

caf6916

New Member
Nov 27, 2004
12
0
0
Jan 10, 2006
#5
  • Jan 10, 2006
  • #5
Gaskets should be here by the weekend. Thanks for the feed back!
 

CManT1914

New Member
Feb 5, 2004
3,172
2
0
Killeen, Texas
Jan 10, 2006
#6
  • Jan 10, 2006
  • #6
Could be an exhaust leak, could be a loose rocker. FWIW, the exhaust leak will get quieter as the engine heats up due to the expanding metals causing the gap to close. The rockers will do the same though. But an exhaust leak is heard MAINLY under load, and it's not entirely consistent with engine RPM. A rocker will be heard all the time, and is in sync with engine RPM.
 

caf6916

New Member
Nov 27, 2004
12
0
0
Jan 12, 2006
#7
  • Jan 12, 2006
  • #7
Exactly. I pulled off the rocker cover and checked all the roller rockers. Everything looked fine there. I have also verified that it's not leaking at the collector. So... It's either a cracked/holy header or a blown gasket. I am hoping for the latter!
 
You must log in or register to reply here.

Similar threads

R
bbk shorty header to mid pipe gasket
  • randyyy
  • Sep 29, 2025
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
4
Views
352
1996 - 2004 SN95 Mustang -General/Talk- Sep 29, 2025
randyyy
R
R
94’ SN95 - Intermittent lope & bogging at moderate rpm
  • Red5.0ho
  • Nov 2, 2025
  • 1994 - 1995 Specific Tech
Replies
5
Views
457
1994 - 1995 Specific Tech Nov 3, 2025
General karthief
Engine New Oil Leak Help.
  • Slo5Oh89
  • Mar 14, 2025
  • Fox 5.0 Mustang Tech
Replies
8
Views
598
Fox 5.0 Mustang Tech Mar 19, 2025
Slo5Oh89
B
90Gt squeal/chirp when hot
  • Bvoss59
  • Jun 12, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
23
Views
670
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 14, 2025
General karthief
D
Paint and Body Passenger side leak on carpet
  • dqureshi06
  • May 15, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
1
Views
263
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- May 16, 2025
limp
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?