94 mustang gt why wont it start

H

Hurstc84

New Member

Oct 2, 2023

6

0

1

Ga

Oct 2, 2023

#1

• Oct 2, 2023

• #1

I have a 1994 mustang gt 5.0ho and I’ve replaced every ignition component on the car there’s no Anit thief I’ve put new fuel pump new timing chain someone please help me out I’ve got fire got fuel

 

H

Hurstc84

New Member

Oct 2, 2023

6

0

1

Ga

Oct 2, 2023

#2

• Oct 2, 2023

• #2

And also there is a beep when I’m in the car after the key switch is on and not the normal chime it’s 4 beeps 4-5 times is that any sign of what the problem is

 

nickyb

I gotta say i never painted my nuts, Never Ever

15 Year Member

Apr 3, 2009

2,979

1,626

153

nevada

Oct 2, 2023

#3

• Oct 2, 2023

• #3

Have you checked fuel pressure? Checked spark at plugs?
Check the no start dhecklist???

 

H

Hurstc84

New Member

Oct 2, 2023

6

0

1

Ga

Oct 2, 2023

#4

• Oct 2, 2023

• #4

Yea fuel is around 45-50 I have spark but it is a weak one it’s seems like there’s something holding it back

 

General karthief

wonder how much it would cost to ship you a pair

20+ Year Stangneter

Aug 25, 2016

27,924

10,570

203

polk county florida

Oct 2, 2023

#5

• Oct 2, 2023

• #5

Scan for codes?

 

Reactions: AeroCoupe

AeroCoupe

lube between the nut and the face. I know my lubes

Founding Member

Oct 28, 2001

5,882

4,007

183

Claremore, OK

Oct 2, 2023

#6

• Oct 2, 2023

• #6

When you say weak spark are you checking it on the coil wire or at the spark plug end of the individual cylinder wires? Fuel pressure is really high if the car is stock. Stock fuel pressure with the vacuum line off the regulator should be 38-39 psi.

 

Reactions: General karthief

H

Hurstc84

New Member

Oct 2, 2023

6

0

1

Ga

Oct 2, 2023

#7

• Oct 2, 2023

• #7

AeroCoupe said:

When you say weak spark are you checking it on the coil wire or at the spark plug end of the individual cylinder wires? Fuel pressure is really high if the car is stock. Stock fuel pressure with the vacuum line off the regulator should be 38-39 psi.

Click to expand...

I had it at 36 but was told 42 at least and yes I’m checking the spark at the end of the plug wires and my obd port acts like it has no power going to it when I plug I’m my scanner nothing hapoens

 

General karthief

wonder how much it would cost to ship you a pair

20+ Year Stangneter

Aug 25, 2016

27,924

10,570

203

polk county florida

Oct 3, 2023

#8

• Oct 3, 2023

• #8

Does the cel come on when the key is turned to 'on' or start?
Are you plugging the scanner in under the hood on the passenger side? There is a diagnostic port under the dash but it will not do anything,
You are using a OBD 1 scanner right? The 94-5 models are change-over years, setting up for 4.6 and obd II.

 

H

Hurstc84

New Member

Oct 2, 2023

6

0

1

Ga

Oct 3, 2023

#9

• Oct 3, 2023

• #9

I believe my scanner does 1-2 is the one under the hood the same plugstyle

 

Foxtrot245

Member

Aug 22, 2023

7

2

13

Memphis

Oct 3, 2023

#10

• Oct 3, 2023

• #10

I bought this one at Autozone it works good for my 95 5.0 for that connector in the passenger side engine bay.

 

General karthief

wonder how much it would cost to ship you a pair

20+ Year Stangneter

Aug 25, 2016

27,924

10,570

203

polk county florida

Oct 3, 2023

#11

• Oct 3, 2023

• #11

Hurstc84 said:

I believe my scanner does 1-2 is the one under the hood the same plugstyle

Click to expand...

I believe not. The one under the dash don't do anything.
Should look like this:

Some may still have a cover on them.

 

H

Hurstc84

New Member

Oct 2, 2023

6

0

1

Ga

Oct 3, 2023

#12

• Oct 3, 2023

• #12

Foxtrot245 said:

I bought this one at Autozone it works good for my 95 5.0 for that connector in the passenger side engine bay.

Click to expand...

Ok thanks