• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

'94 stang ele. fan...

  • Thread starter Thread starter KINGKAOS
  • Start date Start date Apr 13, 2009
K

KINGKAOS

New Member
Mar 8, 2009
35
0
0
Newport, Maine
Apr 13, 2009
#1
  • Apr 13, 2009
  • #1
Will it be as good as the mark viii's!?! Will it be the same install?

Thanx
 

85_SS_302_Coupe

it sucks (I know) to be on the receiving end
15 Year Member
Nov 11, 2003
6,945
1,598
223
Northern KY
Apr 13, 2009
#2
  • Apr 13, 2009
  • #2
I don't know if i'd say "as good". I'm sure it'll work just fine, but may not move as much air. The only other fan i've ever heard of that moves as much as the Mark fan is a Viper V10 fan. It should do just as good as the Taurs fan though and they're not far behind the Mark.
 
K

KINGKAOS

New Member
Mar 8, 2009
35
0
0
Newport, Maine
Apr 14, 2009
#3
  • Apr 14, 2009
  • #3
K, Thanx!
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Apr 14, 2009
#4
  • Apr 14, 2009
  • #4
The shroud is kind of a funky shape. There's a difference between V6 and GT fans as well. The GT fans had wire-connector and fan-motor issues.
 
K

KINGKAOS

New Member
Mar 8, 2009
35
0
0
Newport, Maine
Apr 14, 2009
#5
  • Apr 14, 2009
  • #5
HISSIN50 said:
The shroud is kind of a funky shape. There's a difference between V6 and GT fans as well. The GT fans had wire-connector and fan-motor issues.
Click to expand...

Good to know.. Thanx
 

jrichker

StangNet's favorite TOOL
In Remembrance. Thank you for your contributions
Mar 10, 2000
27,512
2,813
234
Dublin GA
Apr 14, 2009
#6
  • Apr 14, 2009
  • #6
If you don't have a high current alternator, you can forget about using an electric fan. The stock 65 amp alternator on 86-93 Model Mustangs isn't big enough to run the fan and the rest of the car.

3G 130 amp alternator installation instructions: Stangnet 3G install sticky http://forums.stangnet.com/showthread.php?t=646825

Switching a fan on and off manually is a bad idea. Too many guys have been distracted (hot girl kissing on their neck, too much to drink, dog tired and not thinking clearly) and cooked things because they forgot to flip the switch. An equal number have forgotten to turn the switch off for the same reasons and run down their battery.

The best fan controller available today is a DC Control unit. Now serving. Cost is about $110. Be prepared to wait 4 weeks or more to receive your controller once you have sent in your payment. The controllers are custom made in small lots and lead times can stretch out.

Next best is a SPAL controller - $70-$90 See http://www.spalusa.com/fans/automated/accessories/fanpwm.html. Ebay will have the controllers for the $70: do a google search and see what you find.

At the bottom are the Hayden or Imperial controllers available through Advance Discount Auto Parts and AutoZone. The non adjustable one is about $30 ( Hayden 226206) and the adjustable one is about $60 (Hayden 226204). I recommend you do a Google search on Hayden and the part number for more info.

Do not use a simple on/off switch without using a relay. The current load can burn up the typical cheap automotive switch very quickly. The fan draws 30+amps and you need to use #10 wire on the fan power and ground wiring.

If you are good with electrical stuff (90% of the people here aren't), build your own controller. The numbers on the diagram (#86, #87, etc) refer to the numbers on the bottom of a typical automotive relay.



Note that the thermostat switch in the diagram isn’t really suited for the job. You’ll have to do a Google search and find your own.

This version of the fan controller will continue to run the fan after the ignition switch is turned off, just like most new cars.

To allow the ignition switch to control the fan so that it does not run when the ignition is off, connect the relay contact #86 to the red/green wire on the ignition coil or to the red/yellow wire on the coolant level sensor.


If you are an experienced electronics tech or electrical engineer, email me and I will send you the prototype drawings of a fan controller that is probably as good as the DC Control unit. It is a build it, troubleshoot it yourself item. I will not build or troubleshoot units, so it is not suitable for anyone who isn't really good with electronics.

Alternate placement for a temp gauge sender or temp switch/temp sensor for an electric fan. Use the heater feed that comes off the intake manifold. Cut the rubber hose that connects the manifold water feed to the heater and splice in a tee adapter for the temp gauge sender. Be sure to use the same water feed line as the ECT sensor. That way you will get the most accurate temp readings.

Tee adapter info:
Make a pilgrimage to your local hardware or home supply center and get some copper pipe and a tee that fits the temp gauge sender. Solder two pieces of copper pipe onto a copper pipe tee with threads in the tee part. Find the correct brass fitting to match the temp sender threads to the tee fitting.

 

85_SS_302_Coupe

it sucks (I know) to be on the receiving end
15 Year Member
Nov 11, 2003
6,945
1,598
223
Northern KY
Apr 14, 2009
#7
  • Apr 14, 2009
  • #7
Are the '95 style radiators the closed type or do they have a fill neck like a Fox rad? Could you just get the whole radiator/fan setup and swap it over?
 
K

KINGKAOS

New Member
Mar 8, 2009
35
0
0
Newport, Maine
Apr 14, 2009
#8
  • Apr 14, 2009
  • #8
Thanx for the info jrichker! Much appreciated!
 
You must log in or register to reply here.

Similar threads

Electrical Lincoln Mark VIII Replacement Fan Motor
  • AeroCoupe
  • Sep 26, 2026
  • Fox 5.0 Mustang Tech
Replies
2
Views
173
Fox 5.0 Mustang Tech Sep 26, 2026
AeroCoupe
Engine Themostat
  • Mindseye007
  • Jan 30, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
21
Views
1K
Fox 5.0 Mustang Tech Feb 1, 2026
86HO5.0
8
W
2.3l cooling fan questions
  • waxman
  • Jun 26, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
3
Views
196
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 27, 2026
AeroCoupe
F
AC Compressor Power & Contour Fans
  • Fri Guy
  • Aug 27, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
10
Views
617
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 15, 2026
BoostedRed89gt
Resolved 93 Mustang 5.0 - Cranks but does not start
  • dan50
  • Jul 18, 2026
  • Fox 5.0 Mustang Tech
Replies
6
Views
496
Fox 5.0 Mustang Tech Jul 18, 2026
dan50
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?