95 cobra intake

[bill302]

if i install this 95 cobra intake upper and lower (see pics below) in my 95 gt will it work with my factory throttle body, maf,injectors and cai i have...thanks. if not what will it require to install.

View attachment 392377

View attachment 392381 [/QUOTE]

 

[legalize420]

yes it will work. i have stock injectors and maf. see sig for combo. you will be fine.

 

[bill302]

yes it will work. i have stock injectors and maf. see sig for combo. you will be fine.

my stock gt throttle body will bolt on directly and no need to drill lower and/or upper for sensors ect...thanks

 

[legalize420]

everything will be in the same location

 

[bill302]

thanks...legalize420

 

[sage2k]

bolt it on and go

 

[1TallMF]

Sweet, where did you pick it up? are you planning on cleaning/painting it first?

 

[wytstang]

You will need 4 longer bolts (top 4 on the upper) as the cobra sits higher then the stocker.

 

[bill302]

do i need the 70mm. throttle body with this intake, at this point will it hurt low end, i believe its wasteing money at this point anyone else agree...thanks.and the 70 mm. throttle body is an install and run item requiring no additional parts to run.

 

[JJ95GTID]

You don't need the 70mm TB.

If and when you decide to go with one as long as it states 94-95 specific no additional parts are needed. You just install your TPS and IAC electronics on the new TB.

The one exception was the FRPP 65mm which came with both TPS and IAC. Thus the elevated price tag on the FRPP unit.

The Cobra intake will not hinder low end torque.

 

[gunmetal5.0]

Time to polish that bad boy.

 

[xkuntrycowboyx]

polish?? ... go flat black!