• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

95 Gt Harness And Ecu In A Fox?

  • Thread starter Thread starter Wknd_Warrior
  • Start date Start date Apr 10, 2015

Wknd_Warrior

TunaMan
Founding Member
Jan 31, 2000
1,564
0
36
New Jersey
Apr 10, 2015
#1
  • Apr 10, 2015
  • #1
I have an 88 gt that the engine harness is no good. Want to use a donor harness and ecu from a 95 gt. will that work? Only thing I see is the distribitor plug end is different. Thanks!
 

jrichker

StangNet's favorite TOOL
In Remembrance. Thank you for your contributions
Mar 10, 2000
27,512
2,813
234
Dublin GA
Apr 10, 2015
#2
  • Apr 10, 2015
  • #2
Not unless you are a Ford electrical genus.
The CCM module is an integral part of the computer and body wiring in a 94-95 GT and it controls a bunch of different stuff. There is no CCM in an 88 Mustang.

Diagrams courtesy of Tmoss & Stang&2birds
Complete computer, actuator & sensor wiring diagram for 88-91 Mass Air Mustangs


94-95 Mustang GT engine, computer and transmission wiring diagram




See the following website for some help from Tmoss (diagram designer) & Stang&2Birds (website host) for help on 88-95 wiring Mustang FAQ - Wiring & Engine Info Everyone should bookmark this site.

94-95 Mustang wiring diagrams
Mustang FAQ - Wiring & Engine Info

Complete computer, actuator & sensor wiring diagram for 91-93 Mass Air Mustangs
http://www.veryuseful.com/mustang/tech/engine/images/91-93_5.0_EEC_Wiring_Diagram.gif

Complete computer, actuator & sensor wiring diagram for 88-91 Mass Air Mustangs
http://www.veryuseful.com/mustang/tech/engine/images/88-91_5.0_EEC_Wiring_Diagram.gif

Ignition switch wiring
http://www.veryuseful.com/mustang/tech/engine/images/IgnitionSwitchWiring.gif

Fuel, alternator, A/C and ignition wiring
http://www.veryuseful.com/mustang/tech/engine/images/fuel-alt-links-ign-ac.gif

O2 sensor wiring harness
http://www.veryuseful.com/mustang/tech/engine/images/mustangO2Harness.gif

Vacuum diagram 89-93 Mustangs
http://www.veryuseful.com/mustang/tech/engine/images/mustangFoxFordVacuumDiagram.jpg

HVAC vacuum diagram
http://www.veryuseful.com/mustang/tech/engine/images/Mustang_AC_heat_vacuum_controls.gif

TFI module differences & pin out
http://www.veryuseful.com/mustang/tech/engine/images/TFI_5.0_comparison.gif

Fuse box layout
http://www.veryuseful.com/mustang/tech/engine/images/MustangFuseBox.gif

87-92 power window wiring
http://www.veryuseful.com/mustang/tech/engine/images/mustang87-92 PowerWindowWiring.gif

93 power window wiring
http://www.veryuseful.com/mustang/tech/engine/images/mustang93PowerWindows.gif

T5 Cutaway showing T5 internal parts
http://www.veryuseful.com/mustang/tech/engine/images/5_Speed_Cutaway_Illustrated.jpg

Visual comparison of the Ford Fuel Injectors, picture by TMoss:
http://www.veryuseful.com/mustang/tech/engine/images/Ford_Injector_Guide.jpg
 
Last edited: Apr 11, 2015

mikestang63

SN Certified Technician
Aug 27, 2012
11,606
8,859
214
In the garage
Apr 10, 2015
#3
  • Apr 10, 2015
  • #3
Do yourself a big favor and just replace the 88 harness with another one. The 95 EEC is TERRIBLE. The engine harnesses are different- example the coil and distributor. If your car is not MAF then you can't use the 95 EEC. Your car doesn't have air bags, elecric fans, a computer controlled trans (if auto) and so on .

edit- I see jrichker beat me to it.
 

Mustang5L5

That is…until I whipped out my Bissell
Mod Dude
Feb 18, 2001
43,324
18,049
224
Massachusetts
Apr 14, 2015
#4
  • Apr 14, 2015
  • #4
Wknd_Warrior said:
I have an 88 gt that the engine harness is no good. Want to use a donor harness and ecu from a 95 gt. will that work? Only thing I see is the distribitor plug end is different. Thanks!
Click to expand...

The engine harnesses are not compatible. The newer harness would not connect to the 1988 body harness.

Easiest swap harness would be to located another 86-87 or 1988 non-mass air harness.


If your car is a 1988 cali car with mass air, then you need to locate a 1989 mustang mass air harness.

Basically the 86-89 engine and body harness is compatible. In 1990 there were some changes that made it incompatible.
 
You must log in or register to reply here.

Similar threads

7
For Sale Painless SBF fuel injection harness
  • 74delta
  • Aug 14, 2026
  • Other Classifieds
Replies
0
Views
74
Other Classifieds Aug 14, 2026
74delta
7
F
Electrical Foxbody wiring harness 2.3 to v8 swap
  • Foxbodyjake
  • Mar 23, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
26
Views
1K
Fox 5.0 Mustang Tech Sep 7, 2026
Kleinjj27
K
7
What megasquirt kit to order
  • 74delta
  • Jul 4, 2026
  • Digital Self-tuning Forum
Replies
15
Views
469
Digital Self-tuning Forum Aug 26, 2026
fasterthangas
F
1
Electrical Headlight harness trouble
  • 1985fox
  • Apr 14, 2026
  • Fox 5.0 Mustang Tech
Replies
7
Views
390
Fox 5.0 Mustang Tech Apr 17, 2026
AeroCoupe
M
Electrical 93 5.0 No Injector Pulse
  • machinermac
  • Jul 26, 2026
  • Fox 5.0 Mustang Tech
Replies
15
Views
369
Fox 5.0 Mustang Tech Aug 1, 2026
Willybill32
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?