95 mustang front suspension ??????????

[whitepony1995]

i got a few questions about my front end first can you remove the sway bar my car does not have a rear sway bar and i don't really notice any body roll. second the strut mounts can you put new bushings in them or do you have to buy new caster camber plates that is the other name for them right strut mounts or caster/camber plates.

 

[HISSIN50]

The stock plates are too useless to be called CC plates. You can get new mounts (rubber donuts) or if you get aftermarket CC plates, you do away with that donut anyhow.

Good luck.

 

[bmac50]

If you take the front one off make sure you have new bushings, one of mine was so dry rioted if came apart in three pieces so even if I had wanted to reuse it I couldn't. I tried driving mine without either bar and it didn't take me long to put the new ones on.

The stock plates are what Ford could get away with and still have some type of alignment. On a lowered car they are useless unless your into replacing tires every time you turn around. By the time you replace what's warn out you'll have spent close to what real CC plates cost and have much less adjustment for the future.