• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

A/c Delete 1983 Mustang

  • Thread starter Thread starter WRseXy
  • Start date Start date Jul 5, 2013

WRseXy

New Member
Jul 5, 2013
3
0
1
Saskatoon
Jul 5, 2013
#1
  • Jul 5, 2013
  • #1
I am looking to delete the A/C on my 1983 Mustang GT. From what I have read I need to buy a delete kit and I'll need a power steering pump bracket from a newer 5.0L. Can anyone verify this? The information I have found is not very clear.
Thanks
Danyelle
 

jrichker

StangNet's favorite TOOL
In Remembrance. Thank you for your contributions
Mar 10, 2000
27,512
2,813
234
Dublin GA
Jul 6, 2013
#2
  • Jul 6, 2013
  • #2
Save your money and use it on something that will provide a real performance gain like 3.55 or 3.73 rear end gears or an 87-88 Thunderbird Turbo Coupe rear axle. The A/C compressor doesn't draw any HP when it isn't running and only weighs about 15 lbs.
 

WRseXy

New Member
Jul 5, 2013
3
0
1
Saskatoon
Jul 6, 2013
#3
  • Jul 6, 2013
  • #3
jrichker said:
Save your money and use it on something that will provide a real performance gain like 3.55 or 3.73 rear end gears or an 87-88 Thunderbird Turbo Coupe rear axle. The A/C compressor doesn't draw any HP when it isn't running and only weighs about 15 lbs.
Click to expand...


I am aware of this and I'm not looking to gain HP , just looking to clean up my engine bay.
 

88LX5.Oh

15 Year Member
Dec 30, 2011
1,442
204
94
Arkansas
Jul 6, 2013
#4
  • Jul 6, 2013
  • #4
Just take the pump off and run a super short belt?
 

f8tlfiveo

My wife likes my spool and blow-off valve.
Aug 8, 2007
1,585
102
64
Lancaster, PA
Jul 6, 2013
#5
  • Jul 6, 2013
  • #5
When I did my a/c delete I bought the ford racing brackets that move the power steering pump up where the a/c compressor was. All it really is, is a bracket for a non a/c car. Does your car have 1 serpentine belt?
 

WRseXy

New Member
Jul 5, 2013
3
0
1
Saskatoon
Jul 6, 2013
#6
  • Jul 6, 2013
  • #6
yes just one belt but from what I am reading there is a difference in the power steering bracket in the early 80's stangs. It does not allow the ford racing kit to work without switching out the power steering bracket to a newer one. I was hoping someone here had done the delete on an 83 or older that could confirm this.
 
You must log in or register to reply here.

Similar threads

T
Want to Buy (WTB): 1980 Fairmont/Mustang structural dash hull.
  • TimSA
  • Jun 17, 2026
  • Want to Buy
Replies
1
Views
67
Want to Buy Jun 17, 2026
Noobz347
C
SN95 Another Coyote swap list
  • catkiller
  • May 10, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
0
Views
94
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- May 10, 2026
catkiller
C
F
89 GT smog delete belt?
  • fratzke
  • Feb 12, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
11
Views
380
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Feb 25, 2026
fratzke
F
D
Power steering pump bracket with A/C
  • Dczookster
  • Apr 1, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
6
Views
760
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Apr 2, 2025
rednotch
S
Oil cooler delete 4v 4.6 1999 cobra mustang
  • sami12
  • Feb 24, 2026
  • SN95 4.6L Mustang Tech
Replies
5
Views
285
SN95 4.6L Mustang Tech Feb 25, 2026
GOvert
G
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?