A/F Guage Question

krahkin

Member

May 7, 2004

183

0

16

Acworth GA

Aug 12, 2004

#1

• Aug 12, 2004

• #1

I am installing an air/fuel guage in my 95 and have run across a slight problem. The directions with my guage do not specify, nor can I locate it in the Hayes manual, which of the 4 O2 wires I need to use for my guage. It should be the 0-1V wire. With my voltmeter, I have narrowed it down to 2 wires, but do not know which is the heater and which is the signal. Any help appreciated.

 

AznStanger3v

Active Member

Aug 11, 2003

2,026

0

47

Northern VA

Aug 12, 2004

#2

• Aug 12, 2004

• #2

plug and chug it. just get those one splicers and start hooking things up. you arent hurting anything.

 

F

FEESER 94 COBRA

New Member

Mar 5, 2004

142

0

0

Aug 12, 2004

#3

• Aug 12, 2004

• #3

I hooked mine up down at the computer your left o2 is pin#43 on your coputer its red w/black your right o2 is pin#44 gray w/light blue

 

krahkin

Member

May 7, 2004

183

0

16

Acworth GA

Aug 12, 2004

#4

• Aug 12, 2004

• #4

Thanks for the help guys!

 

F

FEESER 94 COBRA

New Member

Mar 5, 2004

142

0

0

Aug 12, 2004

#5

• Aug 12, 2004

• #5

Allso if you are only running one gage you can get a toggle switch that will allow you to switch from left to right o2.

 

krahkin

Member

May 7, 2004

183

0

16

Acworth GA

Aug 12, 2004

#6

• Aug 12, 2004

• #6

I hadnt even thought of that, great idea. I had been considering a second gauge, but a toggle switch even better