A few pictures of the 347 slow build

<table border="1">
<tr>
<td>

</td>
<td>

</td>
</tr>
<tr>Pictures of engine block/build and donor car sans engine.
<td>

</td>
<td>

</td>
</tr>
</table>

earleys94gt said:

Always cool to see someone else's project, pics and progress.

You know what heads, cam etc. you are going to use?

Keep up the work and good luck.

Click to expand...

The heads are 185 afr with a holly systemax upper and lower. Cam will be comp cam hr282xe . Have a 90mm-maf and a 75mm accufab race tb to go on.
Rebuilt and reinstalled the rear end last weekend. New trac-pak and 3.73 gears and a new bearing kit.
Will put new rotors on this coming weekend. Put on bbk upper and lower control arms and new kyb's all around from late model restoration. Have a tko-500 to go in and a new shifter as well. Bought a used dual friction center force clutch to go in also.
The motor and kit are from ford strokers, a diy kit, we are actually building two motors at once as the other guy has the red motor in the background of one of the pictures, it's also his shop.
I don't expect to have this thing running until around Feb. only get a few hours per weekend to work on it.

Thanks, after we get the engine a little further along I hope to post a few more pictures.