Well it has begun first off i will recap what has been done so far to make it fit; the ABS module has been moved under the frame to make way for the cold pipe coming off of the turbo, the sway bar had to be removed because the drivers header was hitting it, the starter wire and clutch cable have been rerouted so they are no longer hitting the drivers side header, and i bent the power steering line away from the drivers header as well. So far the fit seems pretty good except for the clearance issues which aren't to big of a deal. I would have liked to keep the sway bar, and i may look into spacing it down to get it to fit but I'll see how it handles first.
here are some current progress pics and i'm hoping to have most of the kit installed by the end of this upcoming weekend.
here are some current progress pics and i'm hoping to have most of the kit installed by the end of this upcoming weekend.