• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech

?? about a/f gauge

  • Thread starter Thread starter phenix86
  • Start date Start date Feb 16, 2004

phenix86

New Member
Mar 3, 2003
544
0
0
Phoenix, Arizona..i have spanked this many ricers-
Feb 16, 2004
#1
  • Feb 16, 2004
  • #1
i am installing an a/f gauge on my 96 Gt and was wondering which wire do i connect the sensor wire too on the o2 sensor. i've tried them all and for some reason the gauge just sits pegged all the way in the green. please help me out. thanks
 
R

RacerGT

Founding Member
Jun 28, 2002
2,371
0
0
St. Charles, Missouri
Feb 16, 2004
#2
  • Feb 16, 2004
  • #2
On my car it was the black wire.
 
M

mhissticobra

Member
Feb 12, 2004
61
0
6
Feb 16, 2004
#3
  • Feb 16, 2004
  • #3
I had the same problem on my 96 cobra. I then called autometer and asked them what was up. The guy then told me to connect it strait to a wire from the computer and all was well from then on. (I forget which color wire though-give autometer a call)
 

bullittmcqueen

New Member
Dec 2, 2002
78
0
0
augusta, georgia
Feb 16, 2004
#4
  • Feb 16, 2004
  • #4
like they said, its the black wire in the o2 sensor bundle
 

xomp

Founding Member
Sep 8, 2002
91
0
6
SOCAL
Feb 16, 2004
#5
  • Feb 16, 2004
  • #5
they changed their site around, but found the original site that i found where to do it from.
http://www.autometer.com/hp/techtips/air_fuel_hookup/air_fuel_hookup.html

94-96 Mustangs
There are two options for this particular hookup, being the left or right oxygen sensors. The best spot to make this hookup is right sensor at the PCM. This is located above or behind the passenger side kick panel. There will be a 104-pin connector in that location. To hook up to the left sensor, go to pin 43 which is a red wire with a black stripe. In order to hook up to the right sensor, go to pin 44 which is a gray wire with a light blue stripe.

i used the gray/light blue one. works, no problems. there are A LOT of wires in the bundle, like about 2 inches thick bundle of wires, just shuffle through them and you'll find them easily enough.
 
You must log in or register to reply here.

Similar threads

M
1996 GT Speedometer electrical nightmare
  • moon96gt
  • Oct 7, 2026
  • SN95 4.6L Mustang Tech
Replies
2
Views
177
SN95 4.6L Mustang Tech Oct 17, 2026
CAMTWO1070
A
A/F ratio gauge install questions.
  • AngryH58
  • Sep 24, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
5
Views
242
1996 - 2004 SN95 Mustang -General/Talk- Oct 22, 2026
Noobz347
I
Engine Help requested in identifying how to resolve engine light issue
  • Ianslaney
  • Oct 4, 2026
  • SN95 4.6L Mustang Tech
Replies
1
Views
183
SN95 4.6L Mustang Tech Oct 4, 2026
Bullitt347
C
Electrical Fuel Gauge...Help! What did I do or Didn't Do?
  • ChickenDeluxe
  • Sep 3, 2026
  • Fox 5.0 Mustang Tech
Replies
2
Views
245
Fox 5.0 Mustang Tech Sep 3, 2026
ChickenDeluxe
C
Engine Random Misfire at idle.
  • Gulftown980x
  • Jul 29, 2026
  • SN95 4.6L Mustang Tech
Replies
11
Views
613
SN95 4.6L Mustang Tech Jul 31, 2026
squeak93
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?