• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

ABS, CEL, and idle problem

  • Thread starter Thread starter mustang6tee8
  • Start date Start date Aug 2, 2006

mustang6tee8

Member
Jul 19, 2005
375
0
17
College Station, TX
Aug 2, 2006
#1
  • Aug 2, 2006
  • #1
I decided to clean my MAF and inlet of the TB, now my CEL is on, and I have to give it a little gas to keep from dying at idle. Any suggestions?

Also, my abs light has been on for quite some time, however the abs system works fine. I cleaned the abs sensors (only on the front wheels), but the light still comes on. What could be the problem?
 

jrichker

StangNet's favorite TOOL
In Remembrance. Thank you for your contributions
Mar 10, 2000
27,512
2,813
234
Dublin GA
Aug 2, 2006
#2
  • Aug 2, 2006
  • #2
Dump the codes and see what the computer says is wrong… Codes can be present without setting the Check Engine Light.

Here's the link to dump the computer codes with only a jumper wire or paper clip and the check engine light, or test light or voltmeter. I’ve used it for years, and it works great.

See http://www.troublecodes.net/Ford/
OR
See http://www.mustangworks.com/articles/electronics/eec-iv_codes.html

IF your car is an 86-88 stang, you'll have to use the test lamp or voltmeter method. There is no functional check engine light on the 86-88's except possibly the Cali Mass Air cars.

Codes have different answers if the engine is running from the answers that it has when the engine isn't running. It helps a lot to know if you had the engine running when you ran the test.

Trouble codes are either 2 digit or 3 digit, there are no cars that use both 2 digit codes and 3 digit codes.

For those who are intimidated by all the wires & connections, see http://www.actron.com/product_detail.php?pid=16153 for what a typical hand scanner looks like. Normal retail price is about $30 or so at AutoZone or Walmart.

Or for a nicer scanner see http://www.midwayautosupply.com/detailedproductdescription.asp?3829 – It has a 3 digit LCD display so that you don’t have to count flashes or beeps.. Cost is $35.


Humm - College Station, TX -must be an Aggie - How many Aggies does it take to...
 

mustang6tee8

Member
Jul 19, 2005
375
0
17
College Station, TX
Aug 2, 2006
#3
  • Aug 2, 2006
  • #3
Ohhh nice one hehe. That's the first Aggie joke I've received here!!
 

mustang6tee8

Member
Jul 19, 2005
375
0
17
College Station, TX
Aug 2, 2006
#4
  • Aug 2, 2006
  • #4
and thanks for the help!
 
You must log in or register to reply here.

Similar threads

A
GT ABS Module in a 2001 Cobra
  • Aamer309
  • Oct 17, 2026
  • SVT Tech Forum
Replies
3
Views
190
SVT Tech Forum Nov 3, 2026
Mustang5L5
G
Idle surging after warm up
  • GALLY3309
  • Jun 10, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
1
Views
258
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 10, 2026
Noobz347
Engine Surging idle on start-up
  • keel
  • Aug 11, 2025
  • Fox 5.0 Mustang Tech
Replies
16
Views
1K
Fox 5.0 Mustang Tech Oct 31, 2025
keel
Engine Random Misfire at idle.
  • Gulftown980x
  • Jul 29, 2026
  • SN95 4.6L Mustang Tech
Replies
11
Views
631
SN95 4.6L Mustang Tech Jul 31, 2026
squeak93
9
1999 mustang rough idle and turns off when coming to a stop
  • 99GTSTANGG
  • Apr 4, 2025
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
5
Views
698
1996 - 2004 SN95 Mustang -General/Talk- Jul 21, 2025
Rainbow27
R
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?