ABS Light?

[sleepergt00]

My ABS dummy light comes on and off at times. Doesn't seem to be any correlation to when I apply the brakes. Anyone else have this happen. I do have the Cobra brake upgrade, however this was occurring before that upgrade.

 

[ToplessStang]

You have to get it scanned to find out what code is in the module. Most likely an ABS wheek sensor.

 

[Mustang5L5]

I beleive there is a way to ground the ABS test port and get the ABS light to blink the codes to you. I am unsure how though or what the codes would mean.

Most likely it's a ABS wheel sensor on it's way out. You might want to give them a quick glance and see if anything looks corroded or cracked.

 

[sleepergt00]

I forget to mention that the sensors looked fine, not sure if that actually are, but they've been physically checked.

 

[Mustang5L5]

Did youunplug them and check the resistance with a meter?

You should get some resistance with a meter. If the sensor is open it is faulty. Wiggle the wiring around to see if it's an intermittent open

 

[sleepergt00]

Will do. Thanks