Alright. Replaced the compressor, lines and dryer. Pulled a vac for 2+ hours. Let stand for another hour , vac held.
Put 2 12oz cans in, pressure would read like 50 or 60 on the low side when the cam was connected, disconnected the can, and pressure was dropping down to like 20. Ac was blowing cold, orifice tube looked like it would frost over. I was expecting to see closer to 30 psi . Wasn’t sure if this was because of needing more r134a or because the ambient temp is like 45 right now.
Put 2 12oz cans in, pressure would read like 50 or 60 on the low side when the cam was connected, disconnected the can, and pressure was dropping down to like 20. Ac was blowing cold, orifice tube looked like it would frost over. I was expecting to see closer to 30 psi . Wasn’t sure if this was because of needing more r134a or because the ambient temp is like 45 right now.