Ac Stopped Working

M

maxxedout

Member

Sep 10, 2014

71

1

8

Aug 21, 2015

#1

• Aug 21, 2015

• #1

Got in the car this morning and the AC will not come on. Looked at the compressor and the clutch is not pulling in. Checked fuses and ok. Going to check power to the compressor clutch tomorrow. But can someone tell me the location of the pressure switch's and if they can be changed without discharge of Freon.

 

Prodigy

Member

Jul 7, 2015

92

21

18

Aug 23, 2015

#2

• Aug 23, 2015

• #2

There is one on the dryer and one on the line at condenser right near intake. This is on a 95 5.0 , not sure if the 4.6 is same. I know that the sensors will kick compressor off if there isn't enough refrigerant in system. However my ac knowledge is elementary.

 

Prodigy

Member

Jul 7, 2015

92

21

18

Aug 24, 2015

#3

• Aug 24, 2015

• #3

On my system the high side sensor, near condenser has a valve. So you should be able to remove without leaking 134. The other on the dryer, I'm not sure about. Hope this helps

 

M

maxxedout

Member

Sep 10, 2014

71

1

8

Aug 31, 2015

#4

• Aug 31, 2015

• #4

Thinks its the CCRM and was wondering what the difference is between the ones with a R on them campared to a S or other letter.

 

M

maxxedout

Member

Sep 10, 2014

71

1

8

Sep 12, 2015

#5

• Sep 12, 2015

• #5

Got it, replaced the CCRM with one off E Bay for 30.00 dollars all works again...