Accufab Plenum + C&L TrueFlow Inlet Pipes???

Slider · Nov 20, 2004

I was thinking about getting an Accufab plenum, and was wondering if the C&L inlet pipe was worth anything. The C&L piece looks very nice, and has a nitrous boss if I want to run nitrous.
http://www.cnlperformance.com/inlet.html

Does anyone have any experience with the C&L piece?
Any performance gain?
Is it worth the price?

Also, where is the best place to buy each of these pieces. I see that Modular Depot carries the Accufab plenum, but are there any places to get it cheaper? Where can you get teh C&L at?

Thanks

twogts4us · Nov 20, 2004

Slider said:
I was thinking about getting an Accufab plenum, and was wondering if the C&L inlet pipe was worth anything. The C&L piece looks very nice, and has a nitrous boss if I want to run nitrous.
http://www.cnlperformance.com/inlet.html

Does anyone have any experience with the C&L piece?
Any performance gain?
Is it worth the price?

Also, where is the best place to buy each of these pieces. I see that Modular Depot carries the Accufab plenum, but are there any places to get it cheaper? Where can you get teh C&L at?

Thanks

Yep, the boss is nice for piping the juice in, and it looks good, but I don't think there is any great, measureable advantage over any other inlet pipe. I just bought it with the C&L MAF (mistake!) and I liked its size (it a big pipe) and just generally how it looks. I got the one on my 02 from www.mustangwarehouse.com, the one on my wife's 01 from WaterDR on modulardepot (slightly used).
Here's a pic of my 02 (note, again, that C&L MAF is now gone).

Darkhorse845 · Nov 20, 2004

Where is a good place to get the Accufab Plenum at a great price?
Anyone?

Darkhorse845 · Nov 20, 2004

myponyrocks · Nov 20, 2004

http://www.coolblueperformance.com/browseproducts/Accufab-4.6L-2v-75mm-Throttle-Body---Plenum.html

419 for accufab TB and Plenum, lowest price I found so far, thats where I got mine.

I dunno if that pipe fits the 75mm one thats what I'm looking for now.

Go HoTO! · Nov 20, 2004

twogts4us said:
Yep, the boss is nice for piping the juice in, and it looks good, but I don't think there is any great, measureable advantage over any other inlet pipe. I just bought it with the C&L MAF (mistake!) and I liked its size (it a big pipe) and just generally how it looks. I got the one on my 02 from www.mustangwarehouse.com, the one on my wife's 01 from WaterDR on modulardepot (slightly used).
Here's a pic of my 02 (note, again, that C&L MAF is now gone).

Hey, there is my intake!

I had it on my car. Works fine. As Chris said, the hp gains are very minor. I sold it, because I went with a Steeda CAI and the Steed unit comes with it's own pipe. I now have nitrous too BTW.

I did get some rubbing with the C&L Pipe which made some noise under the hood at WOT. But, I have never heard of this from anyone else. I stuck a piece of cloth under the intake so it could not touch.

Darkhorse845 · Nov 20, 2004

myponyrocks said:
http://www.coolblueperformance.com/browseproducts/Accufab-4.6L-2v-75mm-Throttle-Body---Plenum.html

419 for accufab TB and Plenum, lowest price I found so far, thats where I got mine.

I dunno if that pipe fits the 75mm one thats what I'm looking for now.

Thanks!

twogts4us · Nov 20, 2004

Go HoTO! said:
Hey, there is my intake!

I had it on my car. Works fine. As Chris said, the hp gains are very minor. I sold it, because I went with a Steeda CAI and the Steed unit comes with it's own pipe. I now have nitrous too BTW.

I did get some rubbing with the C&L Pipe which made some noise under the hood at WOT. But, I have never heard of this from anyone else. I stuck a piece of cloth under the intake so it could not touch.

Naw, that's mine...though Tammy's looks nearly identical.
I don't have any rubbing issue with either car's pipe. (did ya bust a motor mount there Blake? )

myponyrocks said:
I dunno if that pipe fits the 75mm one thats what I'm looking for now.

Oh yeah, no problem - it's a big pipe and will actually fit the 75mm better than the 70mm (not that there's a problem with fitting it to a 70mm, it just compresses the blue hose quite a bit). It also works on the OEM TB with their supplied hose adapter-a small piece of slightly smaller hose that fits onto the OEM TB, then the blue hose fits over that and the whole thing is clamped together. It's a nice, quality kit.

myponyrocks · Nov 20, 2004

If I'm not going to run N2O for a while or ever is that thing worth it? 180 for just a pipe and 3hp doesnt seem like too good a deal, while I would like it to spruce up the engine bay, it doesnt appear polished...? And thanks for answering that it fits

LS2 KLR · Nov 21, 2004

I had one with my plenum and 75 t-body and it worked great. I now have a bullit intake and bought one for it as well

Accufab Plenum + C&L TrueFlow Inlet Pipes???

Slider

twogts4us

Darkhorse845

Banned

Darkhorse845

Banned

myponyrocks

I have more billet on the Stang than most women ha

Go HoTO!

New Member

Darkhorse845

Banned

twogts4us

myponyrocks

I have more billet on the Stang than most women ha

LS2 KLR

Member

Similar threads

Accufab Plenum + C&L TrueFlow Inlet Pipes???

Banned

Banned

I have more billet on the Stang than most women ha

New Member

Banned

I have more billet on the Stang than most women ha

Member

Similar threads

Privacy & Transparency

Privacy & Transparency